User manual GIGABYTE GA-7VKMP-P

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commit ment to up date the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] All Rights Reserv ed OnChip VGA Frame Buffer VGA Boot From PCI Slot 1 IRQ Priority PCI Slot 2 IRQ Priority PCI Slot 3 IRQ Priority Realtek LAN ROM initial : 32MB : AGP : Auto : Auto : Auto : Yes ESC: Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 6: PNP/PCI Configuration hifg: Select Item PU/PD/+/- : Modify (Shift)F2: Color F7 : Optimized OnChip VGA Frame Buffer None 8MB 16MB 32MB Disable this function. (Default Value) VGA Boot From PCI AGP Set VGA Boot from PCI VGA Card. (Default Value) - 39 - BIOS Setup English PCI Slot 1, 2, 3 IRQ Priority Auto 3 4 5 7 10 11 1 The sy stem w ill reserv ed a free IRQ for PCI slot 1, 2, 3 dev ice. (Default Value) The s y stem w ill reserv ed IRQ3 for PCI s lot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ3. The s y stem w ill reserv ed IRQ4 for PCI s lot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ4. The s y stem w ill reserv ed IRQ5 for PCI s lot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ5. The s y stem w ill reserv ed IRQ7 for PCI s lot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ7. The s y stem w ill reserv ed IRQ10 for PCI s lot 1, 2, 3 dev ic e if no legacy ISA dev ice using IRQ10. The s y stem w ill reserv ed IRQ11 for PCI s lot 1, 2, 3 dev ic e if no legacy ISA dev ice using IRQ11. Realtek LAN ROM initial No Yes Disable Realtek LAN ROM initial. (Default Value) GA-7VKMP Series Motherboard - 40 - English Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Fail-Safe Defaults (HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE Y/N) ?N LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Fail-Safe Defaults Figure 7: Load Fail-Safe Defaults Load Fail-Safe Defaults Fail-S afe defaults contain the most appropriate system parameter values of to configure the system to achieve max imum stability. - 41 - BIOS Setup English Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Optimized Defaults HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE ( Y/N) ?N LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Optimized Defaults Figure 8: Load Optimized Defaults Load Optimized Defaults Optimized defaults contain the most appropriate system parameter values to configure the s y stem to achiev e max imum perform ance. GA-7VKMP Series Motherboard - 42 - English Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 2001 American Megatrends, Inc. All Rights Reserv ed OnBoard IDE IDE1 Conductor Cable IDE2 Conductor Cable OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 Serial Port2 Mode OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard MIDI Port MIDI Port IRQ OnBoard Game Port OnBoard AC' Audio 97 Onboard Lan Chip : Both : Auto : Auto : Auto : Auto : Auto : Normal : Auto : ECP : Auto : Auto : 300 :5 : 201 : Auto : Enabled ESC: Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 9: Integrated Peripherals hifg: Select Item PU/PD/+/- : Modify (Shift)F2: Color F7 : Optimized OnBoard IDE Disabled Prim ary Secondary Both Disable OnBoard IDE. (Default Value) - 43 - BIOS Setup English IDE1 Conductor Cable Auto ATA66/100/133 ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conduc tor Cable to ATA66/ 100/133 (Please mak e sure y our IDE dev ic e and cable is compatible w ith ATA66/100/133) Set IDE1 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and cable is compatible w ith ATA33) IDE2 Conductor Cable Auto ATA66/100/133 ATA33 Will be automatically detected by BIOS. (Please make sure y our IDE dev ic e and cable is com patible w ith ATA66/100) Set IDE1 Conduc tor Cable to ATA33. (Please m ake sure y our IDE dev ice and cable is compatible w ith ATA33) On Board FDC Auto Disabled Enabled Set On Board FDC to Auto. Enable On Board FDC. Onboard Serial Port 1 Auto Disabled 3F8/ COM1 2F8/ COM2 3E8/ COM3 2E8/ COM4 BIOS w ill automatically setup the port 1 address. Enable onboard Serial port 1 and address is 2E8. Onboard Serial Port 2 Auto Disabled 3F8/ COM1 2F8/ COM2 3E8/ COM3 2E8/ COM4 BIOS w ill automatically setup the port 2 address. Enable onboard Serial port 2 and address is 2E8. GA-7VKMP Series Motherboard - 44 - Serial Port 2 Mode Normal IrDA ASKIR Normal operation. [. . . ] Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you have to type "A:\> Flash841 7VTX. F4" and then press "Enter". Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. [. . . ]