User manual GIGABYTE GA-7VKML

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before pwblicution of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] The sy stem w ill reserv ed IRQ10 for PCI slot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ10. The sy stem w ill reserv ed IRQ11 for PCI slot 1, 2, 3 dev ice if no legacy ISA dev ice using IRQ11. FRealtek LAN ROM initial 8Yes 8No Enabled Realtek LAN ROM initial. (Default Value) Disabled Realtek LAN ROM initial. GA-7VKML Series Motherboard - 46 - English Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Fail-Safe Defaults?HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE (Y/N)?N LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Fail-Safe Defaults Figure 7: Load Fail-Safe Defaults FLoad Fail-Safe Defaults Fail-Safe defaults contain the most appropriate system parameter values of to configure the system to achieve maximum stability. - 47 - BIOS Setup English Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Optimized Defaults?(Y/N)?N DETECTION PNP / PCI CONFIGURATION IDE HDD AUTO LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Optimized Defaults Figure 8: Load Optimized Defaults FLoad Optimized Defaults Optimized defaults contain the most appropriate system parameter values to configure the sy stem to achiev e max imum performance. GA-7VKML Series Motherboard - 48 - English Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 2001 American Megatrends, Inc. All Rights Reserv ed OnBoard IDE IDE1 Conductor Cable IDE2 Conductor Cable OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 Serial Port2 Mode OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard MIDI Port MIDI Port IRQ OnBoard Game Port OnBoard AC' Audio 97 OnBoard Lan Chip :Both :Auto :Auto :Auto :Auto :Auto :Normal :Auto :ECP :Auto :Auto :300 :5 :201 :Auto :Enabled ESC : Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 9: Integrated Peripherals higf: Select Item PU/PD+/-/ : Modify (Shift)F2: Color F7:Optimized F OnBoard IDE 8Disabled 8Both 8Primary 8Secondary Disabled OnBoard IDE Set OnBoard IDE is Both (Default Value). Set OnBoard IDE is Primary Set OnBoard IDE is Secondary C IDE1 Conductor Cable 8Auto 8ATA66/100 8ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/ 100). Set IDE1 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and c able is c ompatible w ith ATA33). - 49 BIOS Setup English C IDE2 Conductor Cable 8Auto 8ATA66/100 8ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/ 100). Set IDE2 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and c able is c ompatible w ith ATA33). FOn Board F DC 8Auto 8Disabled 8Enabled Set On Board FDC is Auto (Default Value). Disabled On Board FDC Enabled On Board FDC FOnboard Serial Port 1 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS will automatically setup the port 1 address (Default Value). Disable onboard Serial port 1. FOnboard Serial Port 2 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS will automatically setup the port 2 address (Default Value). Disable onboard Serial port 2. FSerial Port 2 Mode 8Normal 8IrDA 8ASKIR Normal operation. Onboard I/O chip supports ASKIR. GA-7VKML Series Motherboard - 50 - FOnBoard Parallel port 8378 8278 83BC 8Auto 8Disabled Enable On Board LPT port and address is 378. (Default Value) Disable On Board LPT port. English FParallel Port Mode 8EPP 8ECP 8Normal 8EPP+ECP Using Parallel port as Enhanced Parallel Port. Using Parallel port as Enhanced Parallel Port & Extended Capabilities Port. FParallel Port IRQ 87 8Auto 85 Set Parallel Port IRQ is 7. (Default Value) Set Parallel Port IRQ is 5. FParallel Port DMA 83 8Auto 81 80 Set Parallel Port DMA is 3. Set Parallel Port DMA is 0. FOnBoard MIDI Port 8300 8310 8320 8330 8Disabled Set 300 for MIDI Port. Disabled this function. - 51 - BIOS Setup English C Midi Port IRQ 85 810 811 Set M idi Port IRQ to 5. [. . . ] Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object to connect the positive and negative pins in the battery holder to make them short for one minute). Answer: Please remember to load Fail-Safe Defaults (Or Load BIOS Defaults) after flashing BIOS. However, if the system instability still remains, please clear CMOS to solve the problem. Question 7: Why do I still get a weak sound after turning up the speaker to the maximum volume? [. . . ]