User manual GIGABYTE GA-6OXT

[. . . ] Revision History The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commit ment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publicution of this booklet. DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G. B. T. [. . . ] (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). IDE2 Conductor Cable Auto ATA66/100 ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). USB Controller Enabled Disabled Enable USB Controller. (Default value) Disable USB Controller. USB Keyboard Support Enabled Disabled Enable USB Keyboard Support. (Default value) USB Mouse Support Enabled Disabled Enable USB Mouse Support. (Default value) Init Display First PCI AGP Set Init Display First to PCI. (Default value) Set Init Display First to AGP. 39 GA-6OXT(-A) Motherboard AC97 Audio Auto Disabled Enable onboard AC'97 audio function. (Default Value) Disable this function. AC97 Modem Auto BIOS will search MC97 Codec (AMR Modem Card). (Default Value) Disabled Disable this function. Power On By Mouse Mouse Click Disabled Double click on PS/2 mouse left button. (Default value) Power On By Keyboard Password Disabled Keyboard 98 Enter from 1 to 5 characters to set the Keyboard Power On Password. (Default value) If your keyboard have "POWER Key" button, you can press the key to power on your system. KB Power ON Password Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On Password. Onboard FDC Controller Enabled Disabled Enable onboard FDC port. (Default value) Disable onboard FDC port. 40 BIOS Setup Onboard Serial Port 1 Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS will automatically setup the port 1 address. Disable onboard Serial port 1. Onboard Serial Port 2 Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS will automatically setup the port 2 address. Disable onboard Serial port 2. UART Mode Select (This item allows you to determine which Infra Red(IR) function of Onboard I/O chip) ASKIR IrDA SCR Normal Set onboard I/O chip UART to ASKIR Mode. (Default Value) UR2 Duplex Mode Half Full IR Function Duplex Half. (Default Value) IR Function Duplex Full. 41 GA-6OXT(-A) Motherboard Onboard Parallel port 378/IRQ7 278/IRQ5 Disabled 3BC/IRQ7 Enable onboard LPT port and address is 378/IRQ7. Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP EPP ECP ECP+EPP Using Parallel port as Standard Parallel Port. Using Parallel port as ECP & EPP mode. ECP Mode Use DMA 3 1 Set ECP Mode Use DMA to 3. (Default Value) Set ECP Mode Use DMA to 1. AC Back Function Memory Soft-Off Full-On System power on depends on the status before AC lost. (Default value) Always power on the system when AC back. Game Port Address* 201 209 Disabled Set Game Port Address to 201. Disable this function. Midi Port Address* 300 330 Disabled Set Midi Port Address to 300. [. . . ] (1) After the system boot from floppy disk, type "A:\> dir/w" and press "Enter" to check the entire files in floppy A. Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you have to type "A:\> Flash841 7VTX. F4" and then press "Enter". Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 3 file(s) 0 dir(s) 7VTX. F4 FLASH841. EXE 838, 954 bytes 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. [. . . ]