User manual GIGABYTE GA-6IEML

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commit ment to up date the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before pwblicution of this booklet. Declaration of Conformity Rex Li n DECLARATION OF CONFORMITY Per FCC Part 2 Sect ion 2. 1077(a) Res ponsible Party Name: G. B. T. [. . . ] IDE Primary Slave PIO (for onboard IDE 1st channel) ?Auto ?Mode0~4 BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Manually set the IDE Accessing mode. ?IDE Secondary Master PIO (for onboard IDE 2nd channel) ?Auto ?Mode0~4 BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Manually set the IDE Accessing mode. ?IDE Secondary Slave PIO (for onboard IDE 2nd channel) ?Auto ?Mode0~4 BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Manually set the IDE Accessing mode. ?IDE Primary Master UDMA ?Auto ?Disabled BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disable UDMA function. ?IDE Primary Slave UDMA ?Auto ?Disabled BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disable UDMA function. ?IDE Secondary Master UDMA ?Auto ?Disabled BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disable UDMA function. ?IDE Secondar y Slave UDMA ?Auto ?Disabled BIOS will automatically detect the IDE HDD Accessing mode. (Default value) Disable UDMA function. 42 BIOS Setup ?IDE1 Conductor Cable ?Auto ?ATA66/100 ?ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). ?IDE2 Conductor Cable ?Auto ?ATA66/100 ?ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100). Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). ?(Default value) ?Onboard/AGP Set Init Display First to Onboard / AGP. 43 GA-6IEM Series Motherboard ?Power On By Mouse ?Mouse Click ?Disabled Double click on PS/2 mouse left button. Power On By Keyboard ?Password ?Disabled ?Keyboard 98 Enter from 1 to 5 characters to set the Keyboard Power On Password. (Default value) If your keyboard have "POWER Key" button, you can press the key to power on your system. ?KB Power ON Password ?Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On Password. ?Onboard Ser ial Port 1 ?Auto ?3F8/IRQ4 ?2F8/IRQ3 ?3E8/IRQ4 ?2E8/IRQ3 ?Disabled BIOS will automatically setup the port 1 address. Onboard Ser ial Port 2 ?Auto ?3F8/IRQ4 ?2F8/IRQ3 ?3E8/IRQ4 ?2E8/IRQ3 ?Disabled BIOS will automatically setup the port 2 address. UART Mode Select (This item allows you to determine which Infra Red(IR) function of Onboard I/O chip) ?ASKIR ?IrDA ?SCR ?Normal Set onboard I/O chip UART to ASKIR Mode. (Default Value) IR Function Duplex Full. 45 GA-6IEM Series Motherboard ? [. . . ] In this case you have to type "A:\> Flash841 7VTX. F4" and then press "Enter". Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH 841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. Right after that, press "Enter" to start BIOS Flash Utility. 83 GA-6IEM Series Motherboard (3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the procedure, or press [ESC] to quit. [. . . ]