User manual GIGABYTE GA-5AX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE GA-5AX. We hope that this GIGABYTE GA-5AX user guide will be useful to you.


GIGABYTE GA-5AX : Download the complete user guide (1155 Ko)

You may also download the following manuals related to this product:

   GIGABYTE GA-5AX (1308 ko)
   GIGABYTE GA-5AX (1308 ko)
   GIGABYTE GA-5AX annexe 1 (79 ko)
   GIGABYTE GA-5AX annexe 1 (79 ko)
   GIGABYTE GA-5AX annexe 1 (102 ko)
   GIGABYTE GA-5AX annexe 2 (811 ko)
   GIGABYTE GA-5AX annexe 3 (384 ko)
   GIGABYTE GA-5AX annexe 4 (821 ko)
   GIGABYTE GA-5AX annexe 5 (384 ko)
   GIGABYTE GA-5AX annexe 6 (110 ko)
   GIGABYTE GA-5AX annexe 7 (91 ko)
   GIGABYTE GA-5AX annexe 8 (749 ko)
   GIGABYTE GA-5AX annexe 9 (328 ko)
   GIGABYTE GA-5AX annexe 10 (92 ko)
   GIGABYTE GA-5AX annexe 11 (747 ko)
   GIGABYTE GA-5AX annexe 12 (246 ko)

Manual abstract: user guide GIGABYTE GA-5AX

Detailed instructions for use are in the User's Guide.

[. . . ] 5AX USER'S MANUAL ¯ Support Intel Pentium, MMX, Cyrix/IBM, 6x86MX, MII, AMD K6, K6-2 K6-2+, K6-III , IDT Winchip 2, IDT Winchip 3, RISE MP6 CPUs. ¯ Support switching mode Voltage regulator on Board (1. 3V~3. 5V) . (Your ATX power supply must support larger than 720 mA 5V Stand-By current). ( Your ATX power supply supports larger than 300 mA 5V Stand-By current) (Dependent on the specification of keyboards). [. . . ] CMOS RTC & ISA CFG CMOS SRAM Built-in Real Time Clock (RTC) With 256B CMOS SRAM in M5819. 3. 8. SPEAKER CONNECTOR INSTALLATION There is a speaker in AT system for sound purpose. The speaker can work well in both direction of connector when it is installed to the connector SPK on mainboard. 3. 9. ACPI LED CONNECTOR INSTALLATION This mainboard uses the existing power LED as ACPI LED . The ACPI LED will light on when system is power-on . The ACPI LED is off when the system is poweroff. The ACPI LED will blink when system is in Green mode. This connector should be installed to ACPI LED jumper of the mainboard in correct direction. 3. 10. HARDWARE RESET SWITCH CONNECTOR INSTALLATION The RESET switch on panel provides users with HARDWARE RESET function which is almost the same as power-on/off. The system will do a cold start after the RESET switch is pushed and released by user. The RESET switch is a 2 PIN connector and should be installed to RES on mainboard. 3. 11. GREEN FUNCTION INSTALLATION There is one jumper for the purpose of power saving, GN, to indicate the power saving function . PERIPHERAL DEVICE INSTALLATION After installation of the device and setup of the jumpers, the mainboard can be mounted into the case and fixed by screw. To complete the mainboard installation, the peripheral devices could be installed now. If a PCI - Bus device is to be installed in the system, any one of three PCI - Bus slots can be used for Slave or Master PCI - Bus device. After installing the peripheral device, the user should check everything again and prepare to power-on the system. 3-8 BIOS Configuration 4. BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. 4. 1. ENTERING SETUP Power ON the computer and press <Del> immediately will allow you to enter Setup. The other way to enter Setup is to power on the computer, when the below message appears briefly at the bottom of the screen during the POST (Power On Self Test), press <Del> Key or simultaneously press <Ctrl>, <Alt>, and <Esc> keys. Y Press DEL to enter SETUP. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press <Ctrl>, <Alt>, and <Del> keys. 4-1 5AX 4. 2. CONTROL KEYS Up arrow Down arrow Left arrow Right arrow Esc key Move to previous item. Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu. General help, only for Status Page Setup Menu and Option Page Setup Menu. Restore the previous CMOS value from CMOS, only for Option Page Setup Menu. Load the default CMOS value from BIOS default table, only for Option Page Setup Menu. [. . . ] To disable password, just press <Enter> when you are prompted to enter password. Once the password is disabled, the system will boot and you can enter Setup freely. PASSWORD DISABLED If you select System at Security Option of BIOS Features Setup Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup. If you select Setup at Security Option of BIOS Features Setup Menu, you will be prompted only when you try to enter Setup. 4-33 5AX 4. 14. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-5AX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-5AX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.