Detailed instructions for use are in the User's Guide.
[. . . ] 8S648FX-RZ / 8S648FX-RZ-C
Intel® Pentium® 4 Processor Motherboard
User's Manual
Rev. 1002 12ME-S648FXRZ-1002
Copyright
© 2003 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] To exit the Help Window press <Esc>.
The Main Menu (For example: BIOS Ver. : F7d)
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item F10: Save & Exit Setup Time, Date, Hard Disk Type. . .
- 19 -
BIOS Setup
English
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. · Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
· Advanced BIOS Features
This setup page includes all the items of Award special enhanced features.
· Integrated Peripherals
This setup page includes all onboard peripherals.
· Power Management Setup
This setup page includes all the items of Green function features.
· PnP/PCI Configuration
This setup page includes all the configurations of PCI & PnP ISA resources.
· PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, speed.
· Frequency/Voltage Control
This setup page is control CPU clock and frequency ratio.
· Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
· Load Fail-Safe Defaults
Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe configuration.
· Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in best performance configuration.
· Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
· Set User Password
Change, set, or disable password. It allows you to limit access to the system.
· Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
· Exit Without Saving
Abandon all CMOS value changes and exit setup.
8S648FX-RZ Series Motherboard
- 20 -
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Primary Master Primary Slave Secondary Master Secondary Slave Fri, Jan 9 2004 22:31:24 [None] [None] [None] [None] [1. 44M, 3. 5"] [None] [Disabled] [All, But Keyboard] 640K 127M 128M +/-/PU/PD: Value F10: Save F6: Fail-Save Default Item Help Menu Level Change the day, month, year <Week> Sun. <Day> 1 to 31 (or maximum allowed in the month) <Year> 1999 to 2098 ESC: Exit F1: General Help F7: Optimized Defaults
English
Drive A Drive B Floppy 3 Mode Suport Holt On Base Memory Extended Memory Total Memory : Move Enter: Select F5: Previous Values
Date
The date format Week Month Day Year is <week>, <month>, <day>, <year>. The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098
Time
The times format in <hour> <minute> <second>. is 13:00:00.
IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors If a hard disk has not been installed, select NONE and press <Enter>.
- 21 -
BIOS Setup
English
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5. 25" 5. 25 inch PC-type standard drive; 360K byte capacity. 1. 2M, 5. 25" 5. 25 inch AT-type high-density drive; 1. 2M byte capacity (3. 5 inch when 3 Mode is Enabled). 720K, 3. 5" 3. 5 inch double-sided drive; 720K byte capacity 1. 44M, 3. 5" 3. 5 inch double-sided drive; 1. 44M byte capacity. 2. 88M, 3. 5" 3. 5 inch double-sided drive; 2. 88M byte capacity.
Floppy 3 Mode Support (for Japan Area)
Disabled Drive A Drive B Both Normal Floppy Drive. [. . . ] Type "N" will return to Setup Utility.
8S648FX-RZ Series Motherboard
- 34 -
Revision History Drivers Chapter 3 Install
Install Drivers
Pictures below are shown in Windows XP
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup. exe.
English
INSTALL CHIPSET DRIVER
This page shows the drivers that need to be installed for the system. Click each item to install the driver manually or switch to the to install the drivers automatically.
The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just select the drivers you want then click the "GO" button. [. . . ]