User manual GIGABYTE 7VT600-RZ

[. . . ] 1003 12ME-7VT600RZ-1003 AMD AthlonTM / AthlonTM XP / DuronTM Socket A Processor Motherboard Copyright © 2004GIGABYTE TECHNOLOGYCO. , LTD Copyright by GIGA-BYTETECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the propertyof their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitmentto update the informationcontained herein. Mother Board 7VT600-RZ Motherboard 7VT600-RZ Feb. [. . . ] <Day> 1 to 31 (or maximum allowed in the month) <Year> 1999 to 2098 ESC: Exit F1: General Help F7: Optimized Defaults English Drive A Drive B Floppy 3 Mode Suport Holt On Base Memory Extended Memory Total Memory higf : Move Enter: Select F5: Previous Values FDate The date form at is <week>, <month>, <day>, <year>. 8Week 8Month 8Day 8Year The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the m onth) The year, from 1999 through 2098 FTime The tim es format in <hour> <minute> <second>. is 13:00:00. FIDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system m anufacturer. 8Precomp The cyliner number at which the disk driver changes the write current. 8Landing Zone The cylinder number that the disk driver heads(read/write) are seated when the disk drive is parked. If a hard disk has not been installed select NONE and press <Enter>. - 23 BIOS Setup English FDrive A / Drive B The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. No floppy drive installed 5. 25 inch PC-type standard drive; 360K byte capacity. 5. 25 inch AT-type high-density drive; 1. 2M byte capacity (3. 5 inch when 3 Mode is Enabled). 3. 5 inch double-sided drive; 720K byte capacity 3. 5 inch double-sided drive; 1. 44M byte capacity. 3. 5 inch double-sided drive; 2. 88M byte capacity. FFloppy 3 Mode Support (for Japan Area) 8Disabled 8Drive A 8Drive B 8Both Normal Floppy Drive. Drive A & B are 3 mode Floppy Drives. FHalt on The category determines whether the computer will stop if an error is detected during power up. 8NO Errors The system boot will not stop for any error that may be detected and you will be prompted. 8All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. 8All, But Keyboar The system boot will not stop for a keyboard error; it will stop for all other errors. [. . . ] A m essage "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. [. . . ]