Detailed instructions for use are in the User's Guide.
[. . . ] 7VM400M-RZ
AMD SempronTM/AthlonTM/AthlonTM XP/DuronTM Socket A Processor Motherboard
User's Manual
Rev. 1005 12ME-VM400MRZ-1005
Copyright
© 2005 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] To enter Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen.
CONTROL KEYS
< >< >< <Enter> <Esc> <+/PgUp> <-/PgDn> <F1> <F2> <F5> <F6> <F7> <F8> <F9> <F10> >< > Move to select item Select Item Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Item Help Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the file-safe default CMOS value from BIOS default table Load the Optimized Defaults Q-Flash utility System Information Save all the CMOS changes, only for Main Menu
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>.
The Main Menu (For example: BIOS Ver. : F5)
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving
: Select Item F10: Save & Exit Setup Time, Date, Hard Disk Type. . .
- 19 -
BIOS Setup
English
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. · Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
· Advanced BIOS Features
This setup page includes all the items of Award special enhanced features.
· Integrated Peripherals
This setup page includes all onboard peripherals.
· Power Management Setup
This setup page includes all the items of Green function features.
· PnP/PCI Configuration
This setup page includes all the configurations of PCI & PnP ISA resources.
· PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, speed.
· Frequency/Voltage Control
This setup page is control CPU clock and frequency ratio.
· Load Fail-Safe Defaults
Fail-Safe Defaults indicates the value of the system parameters which the system would be in safe configuration.
· Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in best performance configuration.
· Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
· Set User Password
Change, set, or disable password. It allows you to limit access to the system.
· Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
· Exit Without Saving
Abandon all CMOS value changes and exit setup.
7VM400M-RZ Motherboard
- 20 -
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Primary Master Primary Slave Secondary Master Secondary Slave Tue, Nov 2 2004 22:31:24 [None] [None] [None] [None] [1. 44M, 3. 5"] [None] [Disabled] [All, But Keyboard] 640K 127M 128M +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults Item Help Menu Level Change the day, month, year <Week> Sun. <Day> 1 to 31 (or maximum allowed in the month) <Year> 1999 to 2098 ESC: Exit F1: General Help F7: Optimized Defaults
English
Drive A Drive B Floppy 3 Mode Suport Halt On Base Memory Extended Memory Total Memory : Move Enter: Select F5: Previous Values
Date
The date format Week Month Day Year is <week>, <month>, <day>, <year>. The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098
Time
The times format in <hour> <minute> <second>. is 13:00:00.
IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors If a hard disk has not been installed, select NONE and press <Enter>.
- 21 -
BIOS Setup
English
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5. 25" 5. 25 inch PC-type standard drive; 360K byte capacity. 1. 2M, 5. 25" 5. 25 inch AT-type high-density drive; 1. 2M byte capacity (3. 5 inch when 3 Mode is Enabled). 720K, 3. 5" 3. 5 inch double-sided drive; 720K byte capacity 1. 44M, 3. 5" 3. 5 inch double-sided drive; 1. 44M byte capacity. [. . . ] Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address (English): http://www. gigabyte. com. tw WEB address (Chinese): http://chinese. giga-byte. com U. S. A. Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg Deutschland TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. [. . . ]