User manual GARMIN GWS 10 REV A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN GWS 10. We hope that this GARMIN GWS 10 user guide will be useful to you.


GARMIN GWS 10 REV A: Download the complete user guide (8208 Ko)

Manual abstract: user guide GARMIN GWS 10REV A

Detailed instructions for use are in the User's Guide.

[. . . ] Ensure that the shaft lines up correctly with the slot on the anemometer. Route the bare-wire end of the NMEA 2000 backbone cable downward inside or along the mast, leaving an appropriate amount of slack. If there is not a horizontal surface at the top of the mast, fashion a wedge to mount the unit horizontally. Run the bare-wire end of the cable to the existing NMEA 2000 network or to the area where the NMEA 2000 network will be installed. [. . . ] Choose from the following settings to adjust the filter: · Off-- turn off the filter to make the display more responsive to changes in the wind speed. On--select a higher number to increase the responsiveness of the display to changes in the wind speed, or select a lower number to decrease the responsiveness. Calculate the degree of offset of the GWS 10 from the front of the boat. Enter: "anGLEoFFSEt=" followed by the value you calculated in step 1 (for example: ANGLEOFFSET=180). TIP: The time constant value is a number between 0 and 254, which represents the amount of time, in quarter-second increments, that the wind angle must change before it is updated on your display. For example, a value of 40 means that the display will not update the wind angle unless it changes for more than 10 seconds. To use the Auto setting, which adjusts the filter automatically based on wind conditions, use a value of 255. Enter the following command: "anGLEFILtEr=" followed by the value you calculated in step 1 (for example: "ANGLEFILTER=12"). TIP: The time constant value is a number between 0 and 254, which represents the amount of time, in quarter-second increments, that the wind speed must change before it is updated on your display. For example, a value of 40 means that the display will not update the wind speed unless it changes for more than 10 seconds. To use the Auto setting, which adjusts the filter automatically based on wind conditions, use a value of 255. Enter the following command: "SPEEDFILtEr=" followed by the value you calculated in step 1 (for example: "SPEEDFILTER=215"). Use the tables to determine the approved NMEA 2000 PGN information that can be received and transmitted by a GWS 10 when communicating with a NMEA 2000-compliant device. Note: The width of this sensor varies with the positioning of the wind vane. If you have an existing NMEA 2000 network and a NMEA 2000-compatible Garmin chartplotter, ensure that you have updated the software on all devices to the latest version. If you have an existing NMEA 2000 network and do not have a NMEA 2000-compatible Garmin chartplotter, contact Garmin product support or locate a Garmin dealer. Help us better support you by completing our online registration at www. For future reference, write the serial number assigned to your GWS 10 in the space provided. Contact Garmin Product Support if you have any questions while using your GWS 10. And its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. [. . . ] Garmin autorise le téléchargement d'un seul exemplaire du présent manuel sur un disque dur ou tout autre support de stockage électronique pour la consultation et l'impression d'un exemplaire de ce manuel et de ses mises à jour éventuelles, à condition que la copie électronique ou imprimée de ce manuel contienne l'intégralité du texte de la présente mention relative aux droits d'auteur, sous réserve de l'interdiction de toute diffusion commerciale non autorisée de ce manuel ou de ses mises à jour. På ­ velg et høyere tall for å øke responsen til skjermen når det gjelder endringer i vindvinkelen, eller velg et lavere tall for å redusere responsen. På ­ velg et høyere tall for å øke responsen til skjermen når det gjelder endringer i vindstyrke, eller velg et lavere tall for å redusere responsen. Längst upp på masten ansluter du den kabelmonterade termineringen till stamnätskabeln och till GWS 10. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN GWS 10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN GWS 10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.