User manual GARMIN GNS 530

[. . . ] GNS 530 GNS 530A Pilot's Guide & Reference This manual reflects the operation of Main System Software version 4. 0 or above. Some differences in operation may be observed when comparing the information in this manual to earlier software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062 U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin (Europe) Ltd. , Unit 5, The Quadrangle, Abbey Park, Romsey, Hampshire S051 9DL, U. K. [. . . ] 88 Airport Departure Intersection NDB VOR User Waypoint To quickly select a WPT page: 1. (You may skip this step if you are already viewing any of the main pages. Rotate the small right knob to select the desired WPT page. 6 - wpt pages Identifier, Facility Name or City The WPT page group includes ten pages. While viewing any WPT page, rotate the small right knob to select a different WPT page. The first six pages provide detailed information for the selected airport: location, runways, frequencies, approaches, arrivals, and departures. The last four pages provide information for intersections, NDBs, VORs and user-created waypoints. After a WPT page is selected, information for a waypoint may be viewed by entering the identifier (or name) of the desired waypoint. Select the desired WPT page and press the small right knob to activate the cursor. Rotate the small right knob to select the first character of the waypoint's identifier. Repeat steps 3 and 4 until the identifier is selected, then press ENT. To remove the flashing cursor, press the small right knob. Enter a waypoint identifier on the top line of any WPT page (using the small and large right knobs). Once entered, the database information for the selected waypoint is displayed. Airports, NDBs and VORs may be selected by identifier, facility name or city location. Select the Airport Location Page, NDB Page or VOR Page from the WPT page group. Rotate the large right knob to select the facility name or location (city) field. {continued} Enter a waypoint's facility name or city location on the top or middle line of the "Facility, City & Region" data field (this option applies to airports, VORs and NDBs only). Repeat steps 4 and 5 until the facility name or location is selected, then press ENT. To remove the flashing cursor, press the small right knob. Duplicate Waypoints Once the identifier, facility name or location is entered, all six airport pages display information for the selected airport. As you enter an identifier, facility name or location, the GNS 530's Spell'N'FindTM feature scrolls through the database, displaying those waypoints matching the characters you have entered to that point. If duplicate entries exist for the entered facility name or location, additional entries may be viewed by continuing to rotate the small right knob during the selection process (see page 89). If duplicate entries exist for an entered identifier, a duplicate waypoint page appears once you select the identifier (by pressing ENT). To select a facility name or city location, where duplicate entries exist: When selecting a waypoint by facility name or city, you can scroll through duplicate entries by continuing to rotate the small right knob. 1. Select the desired facility name or location, following the steps on page 89. [. . . ] 5 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Setup page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 144-154 Shortcuts, Direct-to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 SIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139, 143 Special-use airspace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]