User manual GARMIN G1000: DIAMOND SVT AND PATHWAYS OPTION COCKPIT REFERENCE GUIDE REV. A, MAR, 2008

[. . . ] G1000 ® Integrated Flight Deck Cockpit Reference Guide for the DA40/40F FLIGHT INSTRUMENTS ENGINE INDICATION SYSTEM NAV/COM/TRANSPONDER/AUDIO PANEL AUTOMATIC FLIGHT CONTROL SYSTEM GPS NAVIGATION FLIGHT PLANNING PROCEDURES HAZARD AVOIDANCE ADDITIONAL FEATURES ABNORMAL OPERATION ANNUNCIATIONS & ALERTS APPENDIX INDEX Copyright © 2004-2008 Garmin Ltd. All rights reserved. This manual reflects the operation of System Software version 0321. 18 or later for the Diamond DA40 and DA40F. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] The original flight plan remains intact in its flight plan catalog storage location. Abnormal Operation Annun/ Alerts Additional Features Hazard Avoidance COPY A FLIGHT PLAN 1) Press the FPL Key on the MFD. A `Copy to flight plan #?' confirmation window is displayed. Garmin G1000 Cockpit Reference Guide for the DA40/40F 190-00324-09 Rev. A Appendix 2) 3) 4) 5) 30 Index Flight Planning 6) With `OK' highlighted, press the ENT Key to copy the flight plan. To cancel, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. Flight Instruments DELETE A FLIGHT PLAN 1) 2) 3) 4) 5) 6) Press the FPL Key on the MFD. With `OK' highlighted, press the ENT Key to delete the flight plan. To cancel, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. EIS Nav/Com/ XPDR/Audio AFCS GPS Nav GRAPHICAL FLIGHT PLAN CREATION 1) 2) Press the FPL Key to display the Active Flight Plan Page on the MFD. Use the Joystick to move the pointer to the desired point on the map to be inserted as a waypoint in the flight plan. If the selected waypoint is to be placed anywhere other than the end of the flight plan, press the FMS Knob to activate the cursor. The default user waypoint naming is USR000, USR001, USR002, and so on. To change the user waypoint name, follow the procedure for modifying a user waypoint. Flight Planning Procedures 3) Hazard Avoidance Additional Features 4) Abnormal Operation 5) Annun/ Alerts Appendix Index 190-00324-09 Rev. A Garmin G1000 Cockpit Reference Guide for the DA40/40F 31 Index Appendix Annun/ Alerts Procedures GPS Nav AFCS EIS Abnormal Operation Additional Features Hazard Avoidance Flight Planning Nav/Com/ XPDR/Audio Flight Instruments Flight Planning 32 Blank Page Garmin G1000 Cockpit Reference Guide for the DA40/40F 190-00324-09 Rev. A Procedures PROCEDURES LOAD AND ACTIVATE A DEPARTURE PROCEDURE 1) 2) 3) 4) 5) 6) 7) 8) 9) Press the PROC Key. The cursor is displayed in the `DEPARTURE' field with a list of available departures. The cursor is displayed in the `TRANSITION' field with a list of available transitions. The departure is active when the flight plan is active. Flight Instruments EIS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Procedures ACTIVATE A DEPARTURE LEG 1) 2) 3) 4) 5) Press the FPL Key on the MFD to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the departure. With `ACTIVATE' highlighted, press the ENT Key. Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts LOAD AN ARRIVAL PROCEDURE 1) 2) 3) Press the PROC Key. The cursor is displayed in the `ARRIVAL' field with a list of available arrivals. 33 Appendix Index 190-00324-09 Rev. A Garmin G1000 Cockpit Reference Guide for the DA40/40F Procedures Flight Instruments 4) 5) 6) 7) 8) 9) Turn the large FMS Knob to highlight the desired arrival. Press the ENT Key. Nav/Com/ XPDR/Audio EIS 10) With `LOAD?' highlighted, press the ENT Key. 12) If an altitude associated with a waypoint in an arrival procedure is to be used to calculate vertical guidance perform the following steps: a) Press the FMS Knob to activate the cursor. b) Turn the large FMS Knob to highlight the desired waypoint altitude. [. . . ] STRMSCP FAIL ­ Stormscope has failed. Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts Appendix Index 190-00324-09 Rev. A Garmin G1000 Cockpit Reference Guide for the DA40/40F 77 Annunciations & Alerts Flight Instruments MISCELLANEOUS MESSAGE ADVISORIES (CONT. ) Message FAILED PATH ­ A data path has failed. The GDU's internal model cannot determine the exact magnetic variance for geographic locations near the magnetic poles. Displayed magnetic course angles may differ from the actual magnetic heading by more than 2°. [. . . ]