User manual GARMIN FORETREX 101

[. . . ] personal navigator® Foretrex 101 TM owner's manual © Copyright 2004­2006 Garmin Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U. K. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium for any purpose without prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual is strictly prohibited. [. . . ] The percentage of memory used by the current track log displays at the top of the page. When the display reaches 100%, the most recent track points start to overwrite the least recent track points (if `WRAP WHEN FULL' is `YES'). To avoid losing track points, save the Track Log when it approaches the 99% mark. Use the UP and DOWN arrows to highlight `TRACKS' and press ENTER to open the Tracks Menu Page. Main Menu Pages Tracks Menu Page Main Menu Page Tracks Menu Page To clear the Track Log from the Tracks Menu Page: 1. Press the ENTER button when `TRACKS' is highlighted to open the Tracks Menu Page. Use the UP and DOWN arrows to highlight `YES' on the pop-up window and press ENTER to clear the track log. Clearing the Track Log 29 Main Menu Pages Tracks Menu Page Using the Track Log To use the track log, select the `PAN TRACK LOG' option to show a pointer that moves along the track log when you press the UP or DOWN button. Use the UP and DOWN arrows to highlight `TRACKS' and press ENTER to open the Tracks Menu Page. Use the UP and DOWN arrows to highlight `PAN & TRACBACK' and press ENTER. Press ENTER to display the Pan Options: `TRACBACK', `GOTO', `MARK', and `ZOOM'. Main Menu Page Tracks Menu Page Panning the Track Log Pan Options After you have panned the track log (using the UP and DOWN buttons), press ENTER to display the Pan Options. TracBack guides you to where you started by following the track log that you left behind, allowing you to return along a traveled path without marking any waypoints. If you want to keep a record of a certain track log or use the `TracBack' feature, clear the Track Log before you start traveling. Goto creates a waypoint called `map' and guides you to it from your current location. Refer to the "Waypoints Menu Page" section for complete information. Zoom adjusts the level of map detail viewable. 30 Using the Setup Track Page Recording: Turn the track log recording `ON' and `OFF'. Record Interval: You can set the track recording interval to change based on `DISTANCE', `TIME', or `AUTO'. If `DISTANCE' or `TIME' is selected, enter a value (a specific distance or time) in the next field. If `AUTO' is selected, enter a value in the `RESOLUTION' field. When `HIGHEST' is selected, the unit will create many points to make the track. When `LOWEST' is selected, the unit will create very few points to make the track. Wrap When Full: Select `YES' to overwrite the oldest tracks with the new ones being made. Select `NO' to have the unit stop recording tracks when the log is full. Defaults: Press ENTER when this is highlighted to restore the unit to the default Track Setup settings. [. . . ] To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an on-line auction. To obtain warranty service, contact your local Garmin authorized dealer. Or call Garmin Product Support at one of the numbers shown below, for shipping instructions and an RMA tracking number. [. . . ]