User manual GARMIN ETREX VISTA H

[. . . ] eTrex Legend H and eTrex Vista H ® ® owner's manual © 2008 Garmin Ltd. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. Liberty House Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Tel. +44 (0) 870. 8501241 (outside the UK) 0808 2380000 (within the UK) Fax +44 (0) 870. 8501251 Garmin Corporation No. [. . . ] To stop navigating, press MENU > Stop Navigation. Use the Route page to edit, change the route name, and review route points. To change the name of the route: 1. Press MENU twice > Routes. eTrex Legend H and eTrex Vista H Owner's Manual Basic Operation 2. Select a saved route > select the route name field at the top of the Route page. 2 Select a saved route > select a point on the Route page > press the ROCKER > Review. To delete a route: From the page for that route press MENU > Delete Route. Select Manual (or Distance) when advancing to the next point. Select Distance to enter a radius, so that when within the entered distance, you are lead to the next point. Select Manual to transition to the next point anytime while navigating a route. eTrex Legend H and eTrex Vista H Owner's Manual Main Pages Main Pages The eTrex Vista H has four main pages: Map page, Compass page, Altimeter page, and the Main Menu. The Active Route page appears in the sequence when you are actively navigating a route. To view the options menu for a page, press MENU. Map Page Compass Page Altimeter Page Main Menu 0 eTrex Legend H and eTrex Vista H Owner's Manual Main Pages Satellite Page This page appears when you turn the unit on and is accessed from the Main Menu thereafter. · GPS Elevation--shows your current elevation. Map Page Satellite Page Options · Use With GPS Off/On-- enables you to turn the GPS receiver on or off. · Track Up/North Up-- indicates whether satellites are shown with the rings oriented with North toward the top of the display or your current track toward the top of the screen. · New Location--use if you have moved the unit more than 600 miles (1, 000 km). A built-in basemap that includes cities, interstates, state and county highways, exit information, and lake and river outlines is shown on this page. Increased road detail, points of interest and mapping data is added when using optional MapSource detailed mapping data. Two map operating modes, position mode and pan mode, determine what is shown on the map display. Position mode pans the map to keep your present location in the eTrex Legend H and eTrex Vista H Owner's Manual Main Pages display area. When you press the ROCKER, the eTrex enters pan mode, which moves the map to keep the white arrow (map pointer) within the display area. Add and configure up to four optional data fields at the top of the page to provide a variety of travel and navigational information. To show data fields on the Map Page: 1. Select the number of data fields you want to show on the Map page, and press the ROCKER. To change a data field display: 1. Move to the next field, and repeat. Using Additional Map Data View listings of nearby restaurants, lodging, shopping centers, attractions and entertainment, and retrieve addresses and phone numbers for any listed location when using optional MapSource data disks. eTrex Legend H and eTrex Vista H Owner's Manual Main Pages To review map information: 1. A check mark means the map is shown on the Map page. the zoom range. When using MapSource maps, "mapsource" appears below the scale. Map Orientation Changing the Zoom Range There are two map orientations in the Setup Map option. Track Up orients the map in the direction of travel. Press the In key to decrease the zoom range and show an area with greater detail; press the Out key to increase the range to see a larger area with less detail. The current zoom range setting is shown in the lower-left corner of the Map page. [. . . ] Case: Rugged, fully gasketed, water resistant, IEC-529, IPX7 Temp: from 5°F to 158°F (from -15°C to 70°C)* *The temperature rating of the eTrex may exceed the usable range of some batteries. Performance Receiver: WAAS/EGNOS enabled, high-sensitivity Acquisition Times: (approximately) Hot start - 3 seconds Warm start - 33 seconds Cold start - 39 seconds Update Rate: 1/second, continuous Antenna: Built-in patch Compass: (Vista H only) Accuracy; ± 5 degrees Resolution; ± 1 degree, user calibrated Altimeter: (Vista H only) Accuracy; ± 10 ft. (0. 3 m), user calibrated Power Source: Two 1. 5 volt AA batteries, 12 Vdc Adapter, or USB Cable Battery Life: Up to 18 hours eTrex Legend H and eTrex Vista H Owner's Manual Appendix Accuracy GPS: <33 ft. (10 m) 95% typical* *Subject to accuracy degradation to 100m 2DRMS under the U. S. [. . . ]