User manual GARMIN ASTRO 320

[. . . ] Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. [. . . ] Selecting more points creates a more accurate track, but fills up the track log faster. To change the color of a dog's track, use the color option on the Saved Track page. To save the entire track log: On the Tracks page, select Save > Yes. Use the Saved Track page to rename the track and view the track distance, the calculated area, and the color for the track on the Map page. Changing the color of a dog's saved track also changes the dog pointer color on the Dog Tracker page. Use the Rocker to move the map pointer to the ending point and press ENTER > OK. To view a track on the map: On the Tracks page, select Save > Yes > Map. Use the Rocker to move the map pointer to the beginning point and press ENTER. After you save a track, you have a record of the path you traveled and a track altitude profile. As you scroll, the elevation for each point appears at the top of the page, and the distance from the Begin point and the End point appear at the bottom. You can create a track elevation profile, from DEM maps, that includes elevation data. When these types of maps are available, a Use Map Data - Use track Data option appears when you select Profile. You can save your track log to use later as a TracBack® that will take you back to the oldest stored track log point. Use the Rocker to move the map pointer to the point on the map you want to backtrack to. Select Follow Road to navigate back to the selected point using available roadways, or Follow Track to retrace your original path of travel. With a saved track shown on the map, move the map pointer to the location on the track that you want to mark. After entering and confirming your changes, select OK (on the keypad). After you create a route, use the Route page to edit the route, change the route name, and review route points. ⷠAuto­When you reach your next point, you are automatically routed to the following point. When you are within that specified distance to your next point, you are routed to the following point. ⷠManual­When routing to your next point, press OUT to begin routing to the following point. Change Data Fields­selects different values for the two data fields at the bottom of the page. [. . . ] Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. Warning: Do not use any radio that has a damaged antenna, because if it comes into contact with your skin, a minor burn can result. electronic Devices­Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless radio. [. . . ]