User manual GARMIN AIS 300 INSTALLATION INSTRUCTIONS

[. . . ] Ensure that the location is well ventilated and away from objects that generate heat. (40 cm) from any compass to avoid interference. Needed tools · Drill and drill bits · Number 2 Phillips screwdriver to mount the receiver box: 1. Ensurethatthechosenlocationisdry, protectedfromwashdown, andwell-ventilated. Usethereceiverboxasatemplate, anduseapenciltomarktheholesinthefourcorners. Donotdrillthroughthereceiverbox. [. . . ] For more information on NMEA 2000, and to purchase required cables and connectors, go to www. garmin. com. The AIS 300 wiring layout diagram on page 2 contains an example of the AIS 300 connected to a Garmin chartplotter through a NMEA 2000 network. Note: If you are unfamiliar with NMEA 2000, see the "NMEA 2000 Network Fundamentals" chapter in the Technical Reference for Garmin NMEA 2000 Products for more information. Visit www. garmin. com/products/AIS300/, and click on "Manuals" on the AIS 300 page. 4 AIS300InstallationInstructions Connecting the AIS 300 to a NMEA 0183 Device (optional) You can connect the AIS 300 to a NMEA 0183-compliant chartplotter using the bare wires on the AIS 300 power/data cable. Connect NMEA 0183 bare wires to a Garmin chartplotter as indicated in the wiring layout diagram on page 3. Consult the diagram below to connect the AIS 300 to a non-Garmin chartplotter. If it is necessary to extend the power wires, use 16 AWG or larger wire. AIS300 receiverbox Wirecolor [function] + Battery 1or4Vdc - Wirefunction Power+ Ground- FuseA Red[power(+)] Black[ground(-)] Yellow [powertoggle--page4] > NMEA0183compliant chartplotter > Gray[TxA(+)] Pink[TxB(-)] Orange/white [speedselect] RxA(+) RxB(-) Unconnected=38400(highspeed) Connectedtobatterynegative(-)=4800(standardspeed) > > Connecting the AIS 300 to a Non-Garmin NMEA 0183 Device Notes: · ConsulttheinstallationinstructionsforyourNMEA0183-compliantdevicetoidentifythereceiving(RX)A(+)andB(-)wires. · IfyourNMEA0183-compliantdevicehasonlyonereceivingwire(Rx), connectittothegraywire[TxA(+)]fromtheAIS300, and leavethepinkwire[TxB(-)]wireunconnected. · TheAIS300cantransmitNMEA0183datausingeither38400baud(default)or4800baud. Connecttheorange/whitewirefromthe AIS300power/datacabletothenegative(-)batteryterminalifyouwouldliketolimittheoutputspeedto4800baud. Refertothe documentationprovidedwithyourchartplottertodeterminethecorrectNMEA0183baudrate. using the AIS 300 If you connected the AIS 300 to a chartplotter using either NMEA 2000 or NMEA 0183, refer to the Owner's Manual provided with your chartplotter for information on using the AIS-specific features of the chartplotter. If you did not connect the AIS 300 to a Garmin chartplotter, ensure that you connected a power toggle switch using the yellow wire on the AIS 300 power/data cable (see page 4). When you want to turn off the AIS 300, open the switch. AIS300InstallationInstructions Appendix Dimensions: W × H × D: 8 5/32 × 5 17/32 × 1 25/32 in. (670 g) temperature Range: from -4ºF to 158ºF (from -20ºC to 70ºC) Compass-safe Distance: 15 3/4 in. (40 cm) Waterproof Rating: IEC 60529 IPX7 (Immersion in 1 meter of standing water for 30 minutes) Specifications 17/3in. (140. mm) Power Source: 9. 6­31. 2 Vdc (12 Vdc or 24 Vdc boat battery) Usage: 2. 5 W max Fuse: 5 A fast-acting NMeA 2000 Power Usage: LEN=2 Antenna Antenna Connector: PL259 Antenna Port Impedance: 50 NMEA 2000 PGN Information Receive 059392 059904 060928 126208 126992 ISOAcknowledgment ISORequest ISOAddressClaim NMEA-Command/Request/AcknowledgeGroupFunction SystemTime transmit 059392 060928 126208 126464 126996 129038 129039 129040 ISOAcknowledgment ISOAddressClaim NMEARequest/Command/AcknowledgeGroupFunction PGNList ProductInformation AISClassAPositionReport AISClassBPositionReport AISClassBExtendedPositionReport AISClassAStaticandVoyageRelatedData AISSARAircraftPositionReport AISSafetyRelatedBroadcastMessage AISClassB"CS"StaticDataReport, PartA AISClassB"CS"StaticDataReport, PartB The Garmin AIS 300 is NMEA 2000 certified. 129794 129798 129802 129809 129810 NMEA 0183 Communication Information When connected to a NMEA 0183 device, the AIS 300 transmits the VDM sentence. Product Registration Help us better support you by completing our online registration today. Keep the original sales receipt, or a photocopy, in a safe place. Contact Garmin Contact Garmin Product Support if you have any questions while using the AIS 300. In the USA, go to www. garmin. com/support, or contact Garmin USA by phone at (913) 397. 8200 or (800) 800. 1020. In Europe, go to www. garmin. com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870. 8501241. AIS300InstallationInstructions 85/3in. (07mm) Industry Canada Compliance FCC Compliance This device complies with Industry Canada Standard RSS-182 and ICES-003. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Garmin will not replace missing components from any package purchased through an online auction. International Purchases: A separate warranty may be provided by international distributors for devices purchased outside the United States depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device. Distributor warranties are only valid in the area of intended distribution. [. . . ]