User manual GARMIN 360 MAP

[. . . ] Salem, Oregon 97309 November 1996 P/N 560-0119-00 Apollo 360 Map Display No part of this document may be reproduced in any form or by any means without the express written consent of II Morrow Inc. II Morrow is a trademark of II Morrow Inc. Toll Free 800-525-6726 Canada Toll Free 800-654-3415 FAX (503) 364-2138 International (503) 391-3411 P/N 560-0119-00 Apollo 360 Map Display History of Revisions November 1996 Original Release Ordering Information To receive additional copies of this publication, order part #560-0119-00, Apollo 360 Map Display User's Guide. P/N 560-0119-00 Apollo 360 Map Display About This Manual About This Manual This manual is divided into five sections, each contains information of a specific type. This information is presented in a logical order such that the best understanding of unit operation can be had by reading this manual in its entirety from front to back. The three appendices at the back of this manual contain information helpful, but not critical to operation of the Apollo 360. [. . . ] You can use your present position or enter lat/lon coordinates for the waypoint's location. The new waypoint function screen allows you to enter a waypoint name of your choice, or you can use the default waypoint name that the unit assigns as a number. P/N 560-0119-00 3-9 Navigating a Trip Apollo 360 Map Display Turn the LARGE knob to move the highlight to the desired character in the waypoint name to change it. Once you have entered the desired waypoint name, you can assign the new waypoint your present position coordinates by pressing the ENT key. If you wish your new waypoint to be located elsewhere, use the LARGE and SMALL knobs to move the highlight and change the waypoint lat/long coordinates. When you are finished, press the ENT key to enter the new waypoint into memory. The fact that you may assign either your present position or lat/lon coordinates of your choice when you create waypoints is significant. You can create waypoints either as you fly, or more conveniently, before or after you fly when you are not busy navigating. The menu function "User Waypoint Management" option allows you to perform these tasks. Getting Use the waypoint information function anytime to get Waypoint information on waypoints in your route or any waypoints Information that appear in the Nearest list. . A complete listing of available information is included in Section 5, that explains the built-in waypoint database. Destination Press the INFO key to activate the waypoint information Waypoint function. Information The waypoint information screen introduced in Section1 shows on the display with information about the current destination waypoint. Turn the LARGE knob to scroll through additional screens of information about the waypoint. Press the INFO key again to return to the navigation function. 3-10 P/N 560-0119-00 Apollo 360 Map Display Navigating a Trip Informatio n About Other Waypoints You can also get information about any other waypoint in your current route by using the route screen together with the waypoint information function. Press the ENT key to select the View mode then use the LARGE knob to select the waypoint name. When the arrow cursor points to the desired waypoint name, press the INFO key to get information about the waypoint. Press the INFO key again to return to the navigation function. Informatio The waypoint information function also works with the nearest n About function. This allows you to quickly get information about any Nearest of the waypoints nearest to your present position. When the list of these waypoints shows on the display, use the LARGE knob to move the arrow cursor to the desired waypoint. To return to the navigation function, press the ENT key. Scanning You can "scan" waypoints on the moving map screens to Waypoints get information quickly. With a moving map screen showing on the display, press the ENT key several times. for Information P/N 560-0119-00 3-11 Navigating a Trip Apollo 360 Map Display Notice that the highlight moves from the destination waypoint to a different waypoint on the screen each time you press this key. [. . . ] Examine the possible causes of the problem and take the action listed to correct the trouble. If your dealer is unavailable, contact the II Morrow factory at the address and phone number listed at the back of this appendix. Problem Possible Cause(s) Unit does Open in power not power supply circuit on Faulty electrical wiring or connection No Host Host device not signal turned on input Faulty wiring or connection Action Check circuit breaker reset if necessary Contact your dealer to perform electrical system test Ensure that host device is powered up Contact your dealer to check wiring ensure that unit is properly connected. Adjust display backlight (use backlight key) or adjust display contrast as Section 5 describes in "Screen Controls" option Display too dark or too light characters hard to see Change in view angle or ambient light conditions in cockpit P/N 560-0119-00 B-1 Troubleshooting Apollo 360 Map Display Problem Possible Cause(s) Action No position Host navigation Ensure that host device is working properly & fix device hasn't acquired fix yet in view of navigation signal input Some host devices No active route in host navigation won't supply nav. [. . . ]