User manual FOUR WINNS LIBERATOR

[. . . ] With the designation of an apparatus with this symbol, the manufacturer furthermore declares that he satisfies all requirements of the law concerning the release, withdrawal and environmentally compatible disposal of electric and electronic appliances. CONTENTS Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 1 ­ Performance Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 You can connect the following autoclaves to the MELAflash CF Card Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6 Watt) (3) Format button to format the CF card (4) Status displays shown by red (data) or green (power) illumination of the LEDs (5) MELAflash CF card Fig. 1: Device views 4 Chapter 2 ­ Device Description MELAflash CF-Card-Schreiber LED Status Displays Power Data green LED red LED Status Measures 01 CF Card Printer ready for operation Insert CF card lights up 02 blinks Access to the CF card (batch output, formatting) CF card is almost full Do NOT remove the CF card (otherwise loss of data!) Have new CF card ready, or copy the data from the CF card to the practice computer and then delete the data from the CF card after copying. Have new CF card ready or copy data on this CF card to another data medium Insert CF card within 5 seconds and only remove when red LED goes out!press the format button briefly light up simultaneously 03 04 blinks rapidly CF card is full blink together 05 lights up Ready for formatting (only 5 seconds) incorrect log 06 alternate blinking 07 blinks rapidly incorrect CF card (e. g. wrong format) or defective CF card format or exchange CF card exchange CF card CF card capacity Warning!Despite the high memory capacity of the CF card, we recommend that you regularly back up the logs at least once a week on the computer. CF card almost full If the CF card can only save less than three more 300 sterilization logs, the green power LED begins to blink with brief interruptions. As soon as possible, save the sterilization logs on the CF card by copying them to your computer with the delivered card reader device. You can continue to save sterilization logs on the CF card until reaching the maximum number of logs which can be stored on the card. CF card full If the CF card is full, no more sterilization logs can be saved on it. In this case, the green power LED and the red data LED blink together with brief interruptions. Save the sterilization logs stored on the CF card by copying them to your computer with the delivered card reader device. 5 Chapter 3 ­ Initial start-up MELAflash CF Card Printer Chapter 3 ­ Initial start-up Connect MELAflash For the power supply, connect the cable of the delivered plug-in power supply unit to the right-hand socket (see 4, Fig. Connect the RS232 interface of the serial cable to the serial data connection of the autoclave. Select the Setup Menu Function by short simultaneous pressing of the (+) and (-) KEYS. Navigate with the (+) or (-) KEY in the Menu Function, until the display 7 Chapter 3 ­ Initial start-up MELAflash CF Card Printer shows Function: Batch Output. Press (P) to select the submenu Batch output ­ Output medium Press the (P) KEY again. The display shows Output medium ­ No output medium, in case no out medium was yet selected. Navigate with the (+) or (-) KEY to where MELAflash is displayed as output medium. The display changes back to the menu Batch output ­ output medium. Press the (S) KEY twice to exit the menu and return to the initial state. In order for sterilization logs to be stored on the CF card directly after the sterilization program is completed, you have to activate the option for immediate output on the autoclave. Select the SETUP Menu Function by short simultaneous pressing of the (+) and (-) KEYS. Navigate with the (+) or (-) KEY to where the display shows Function: Batch Output as output medium and press the (P) KEY. Set immediate output of the logs Navigate with the (+) or (-) KEY until the submenu displays Immediate printout NO/ YES. If the option is set to NO, press the (P) KEY to switch from Immediate Print NO to YES. [. . . ] B. C. 11 Chapter 5 ­ Error conditions Chapter 5 ­ Error conditions Before saving the data, the MELAflash CF Card Printer verifies the log data transferred from the autoclave. Unknown log file If a log file is not recognised, the system creates a directory UNKNOWN on the CF card. Moreover, the red data LED and the green power LED steadily blink alternately (see Table, row 06 on p. To reset the error condition, press briefly on the "Format" button on the top of the MELAflash CF Card Printer (see p. [. . . ]