User manual DIRT DEVIL REBEL71 DD7710

[. . . ] 3 Concerning the power supply The appliance is operated with electrical power which means there is always a risk of electric shock. Therefore, please comply with the following: „ Never immerse the appliance in water or other liquids; keep it away from rain and moisture. Do not operate the appliance outside or in rooms with a high level of humidity. „ Take care that the power cord is not kinked, pinched, or rolled over and ensure it does not come into contact with heat sources. [. . . ] Otherwise the machine might start up and parts of your body, hair or pieces of clothing might be sucked in. You might have to twist the parts when connecting them so they are securely in place. Assemble the appliance and accessory parts depending on the surface you want to vacuum clean (Fig. CAUTION: Before assembling, make sure that the fitted nozzle suits the surface to be cleaned. Any floors or objects with a brush with rotating bristles that you would not clean without a second thought with a conventional brush. With the auxiliary air regulator you can quickly reduce the suction power, to release objects (such as curtains) that have been sucked in. CAUTION: Only use the appliance with all filters undamaged, in dry condition and correctly fitted. Make sure that no objects obstruct the telescopic tube, the suction hose or other openings. Especially when vacuum-cleaning stairs make sure that you always stand on a higher level than the appliance. If the red marking shows retract the cord by pressing the retraction button ( ) to pull in the cord up to the yellow mark (Fig. NOTE: Your vacuum cleaner has an integrated protective function that triggers before the appliance can overheat (e. After vacuuming, switch off the appliance ( ) and wind up the power cord ( ). When winding up the cord keep the plug in your hand so that the cord does not thrash about, possibly injuring you. Keep the appliance and accessories cool and dry and so that it does not take up too much space (Fig. CAUTION: If you intend to store the appliance for a long period, first replace the dust filter bag with a new one, ZChapter 3. 1 3 Maintenance and care Changing the dust filter bag NOTE: Be careful when removing the dust filter bag so that no dust escapes. CAUTION: Switch off the appliance before changing the dust filter bag. 26 27 We recommend: Swirl£ Y50£ MicroPor£ Plus dust filter bags with AirSpace£ Long Power Guarantee Swirl“, AirSpace“ MicroPor“ and Y50“ are registered trade marks of a company of the Melitta group and used with their permission. 26) so that it can erect itself during vacuuming and fill up optimally. NOTE: As soon as the dust filter bag change indicator appears in the window (Fig. In addition, change the dust filter bag at least every three months and before storing for a long period or sending the appliance. CAUTION: You can dispose of the contents of the dust filter bag with your normal domestic waste as long as it contains no substances not allowed in domestic waste. [. . . ] Adjust the position of the collar brush to the floor via the switch on the floor nozzle (Fig. NOTE: If you cannot solve the problem following these instructions, contact the Royal Appliance customer service (ZPage 46, ‘International Service’). 2 Warranty In non-EU countries the minimum requirements of the warranty in the respective country apply. The statutory warranty regulations in accordance with the EU Directive 1999/44/EC apply. [. . . ]