User manual DIGITECH RP7
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DIGITECH RP7. We hope that this DIGITECH RP7 user guide will be useful to you.
Manual abstract: user guide DIGITECH RP7
Detailed instructions for use are in the User's Guide.
[. . . ] Tube Preamp/Effects Processor & Controller
User's Guide
Please visit Digitech Electronics on the World Wide Web at http://www. digitech. com
WARNING
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (e. g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. POWER SOURCES: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. [. . . ] When changing Parameter values, a decimal point will flash in the display when the value is not the stored value for the program. If you return to the original value, the decimal point will stop flashing and the Store LED will go off. If you exit Edit mode after changing the Parameters and then return to Edit mode, the last viewed Parameter will be displayed.
STORE MODE
Once you have modified the Parameters and Effects, you can store them to a user Program location. When you change an Effect or Parameter in a Program, the Store LED will light, indicating that you have changed a Parameter and need to store the changes. Press the <STORE> button once and the first seven segment LED in the Display window will flash U. Select the User Bank and Program location you want to store your changes to, and press the <STORE> button again to save the changes.
8
User Guide
RP-7 Valve
Section - 3 Basic Operations
BYPASS MODE
Allows you to bypass the RP-7 Valve's Effects. Enter this mode by pressing footswitches <3 & 4> simultaneously. BYP will appear in the display window to indicate you are in Bypass mode. When you exit this mode, the RP-7 Valve will default to the last mode you used.
TUNER MODE
Allows you to tune your guitar. Enter Tuner mode by pressing footswitches <1 & 2> simultaneously. tune will appear briefly in the display window followed by --- to indicate that you are in Tuner mode. To begin tuning play a note on your guitar (a harmonic at the 12th fret will work best). The display window will show the note being played and the horizontal Parameter Matrix LEDs just under the tuning bar will light. Once the green LED directly under the IN TUNE of the tuning bar is lit, the note will be in tune. If the note is not in tune, 1 or 2 of the LEDs left or right of the IN TUNE LED will be lit. If the LEDs are to the right, the note is sharp and should tuned down. You can change your tuning preference by using the value <UP> and <DOWN> buttons. The tuning reference control ranges from 427 Hz to 453 Hz, which is the equivalent of ± 50 cents (1/2 semitone) in either direction form 440 Hz. When you scroll down from 427 Hz, you will also find alternate dropped tunings. The display window will briefly flash the currently selected tuning preference. When you exit this mode, the RP-7 Valve will default to the last mode you used.
LEARN-A-LICK MODE
The Learn-A-Lick function allows you to record a 12 second passage of music and play it back as slow as 1/2 speed with no change in pitch. They include: · Start / Stop · Rewind · Fast Forward · Record Using Learn-A-Lick · Connect the output of your CD or tape player headphone output to the Jam-a-long input jack on the rear panel. [. . . ] Ranges from 1 to 10.
Level Decay Time
User Guide
19
Section - 4 Effects and Parameters
RP-7 Valve
Speaker Cabinet Emulator
Parameters
On/Bypass Type
Displayed Values
On-Byp 1. . . 10
The RP-7 Valve's programmable Speaker Cabinet circuitry allows you to use it in both recording and live situations without lugging heavy amps and/or cabinets around. Just connect the RP-7 Valve's outputs to a mixing console and kick in the Speaker Cabinet. No miking hassles, no heavy equipment, just full on miked cabinet sound. Programs can be stored with different Speaker Cabinet settings so you can customize your Banks for whatever sound types you need. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DIGITECH RP7
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DIGITECH RP7 will begin.