User manual DE DIETRICH VALVES BROCHURE

[. . . ] They thus present the same characte ristics of resistance to corrosion, ther mal and mechanical shock as all of the other appliances in the De Dietrich® range, particularly the reactors on which they are installed. All other parts in contact with the process are made of fluoropolymer (PTFE, PFA). [. . . ] Indeed, depending on the type of nozzle to which it is to be fitted, only the design of the valve will vary. It goes without saying that flat seat valves can be fitted to new reactors or replace any other kind of existing valve. LOWER PRODUCTION COSTS CleanValve valves fitted with a flat seat guarantee optimal cleanability. This affords significant time savings. SAFETY ­ MAINTENANCE Flat seats considerably improve safety to the extent that dismantling is simpli fied during maintenance operations. OPTIMAL CLEANING The use of a flat seat makes it possible to eradicate the dead zones between the outlet nozzle and the seat. This therefore prevents crosscon tamination and thus facilitates cleaning approval. PRESENTATION OF THE DIFFERENT OPTIONS AVAILABLE ASSEMBLY ON SWAGED NOZZLE ASSEMBLY ON PAD TYPE FLANGE Traditional seat + flat stem head INNOVATION Flat seat + raised stem head 100% CLEANABILITY Flat seat + flat stem head CVBSP CVBSP cross section CVBPSP CVBSP cross section CVBPLZ SP CVBPLZ SP cross section ACCESSORIES ALL OF OUR VALVES CAN BE FITTED WITH VARIOUS ACCESSORIES FACILITATING THEIR IMPLEMENTATION AND USE SINGLE ACTION PNEUMATIC CONTROL WITH RETURN SPRINGS EMERGENCY MANUAL CONTROL LIMIT SWITCHES POSITIONER QUICKEXHAUST VALVE FOR THE PNEUMATIC ACTUATORS SOLENOID CONTROL VALVE SPRAY NOZZLE TEMPERATURE MEASUREMENT This measurement is made through the enamel coating on the valve, without a seal, with no risk of leakage, using an SVR2 sensor fitted with two Pt 100 probes (2x3 wires). A patented coupling, located between the valve and the pneumatic actuator, is used to dismantle the SVR2 sensor without removing the valve, even during the process and in complete safety. Replacement kits containing coupling and temperature sensor are available to be fitted to valves already in service. THE SPRAY NOZZLE De Dietrich® CleanValve valves can be fitted with a retractable spray nozzle. It is installed on the side opening of the valve body and is used to clean it with out dismantling. The nozzle is deployed by the pressure of the medium used for cleaning and retracts automatically at the end of the cycle. GLASS VALVES For reaction units constructed around special reactors from the VERI range, we use a DN40 glass valve in which the PTFE piston is directly applied without a seat to the enamelled reactor flange. These valves are produced by De Dietrich Process Systems GmbH. Various connecting heads are available, fitted either with terminal blocks or temperature transmitters. We would draw your attention to the fact that, in transient heating or cooling states, it is normal to observe a difference between the temperature measured by the valve and the temperature measured on the baffle. [. . . ] Office Moscow Phone +7 495 663 9904 Fax +7 495 663 9905 info@ddps. ru The international business group De Dietrich Process Systems is the leading provider of system solutions and reactors for corrosive applications as well as plants for mechanical solid/liquid separation and drying. The system solutions from De Dietrich Process Systems are used in the industrial areas of pharmaceuticals, chemicals and allied industries. www. dedietrich. com This document has been printed on paper from sustainably managed forests. [. . . ]