User manual DE DIETRICH DWD1194GX

[. . . ] Please refer to the leaflet supplied with the Miele|home Communication module for details on how to install it and on how to sign it on to your Miele|home system. The Miele|home master appliance is supplied with its own operating instructions. 6 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. are disposed of safely and kept out of the reach of babies and young children. Rather than just throwing these materials away, please ensure that they are recycled. Disposal of your old appliance Please ensure that the appliance presents no danger to children while being stored for disposal. [. . . ] Low humidity causes corks to dry out from the outside, and so do not seal the bottles as tightly. Wine should be stored lying down to keep the corks moist from the inside too. An ideal humidity level of up to 70 % will be maintained inside the appliance as long as the ambient room temperature is between 15°C and 35°C. Useful tip: Before serving, stand the wine upright for at least two hours, or the entire day if possible, to allow any sediment to settle at the bottom of the bottle. ^ Press the constant humidity button m. Even if Dynamic cooling has not been switched on, the fan in the appliance will come on automatically when the cooling system switches on to ensure your wine is kept in the optimum climate. The fan automatically switches off when the door is open. 15 The optimum temperature and humidity Switching off Dynamic cooling The appliance uses slightly more energy and is a little noisier when the Dynamic cooling function is switched on. If you are storing your wine for the long term and so have Dynamic cooling switched on constantly, you can switch it off now and then if you like. The indicator light will go out. Air filtering with the active charcoal filter The active charcoal filter achieves optimum air quality by filtering the incoming air. Fresh air from the outside enters the appliance via the active charcoal filter. The dynamic cooling system then distributes the air evenly throughout the cabinet. Filtering the incoming air through the active charcoal filter ensures that all the air entering the appliance is fresh and free from dust and smells. Replace the active charcoal filter with a new one once a year (see "Cleaning and care"). Steam could reach the electrical components and cause a short circuit. It contains information which is required in the event of a service call. shelves, for cleaning. Cleaning the outer casing, the interior and accessories Use warm water with a little washing up liquid. ^ Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. ^ Clean stainless steel surfaces with a suitable cleaning agent following the manufacturer's instructions on the packaging. ^ After cleaning, wipe the interior and accessories with a damp cloth, and dry with a soft cloth. Leave the door open to air the appliance for a short while. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. 20 Cleaning and care Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Active charcoal filter Replace the active charcoal filter with a new one once a year. Active charcoal filters are available from your Miele Dealer or the Miele Spare Parts Department. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seal should be cleaned regularly with clean water and then wiped dry with a soft cloth. ^ Turn the filter 90° clockwise or anti-clockwise until it clicks into position. Metal grille at the back of the appliance The metal grille at the back of the appliance (heat exchanger) should be dusted at least once a year. [. . . ] Removing the door handle: First the side section of the handle must be removed: ^ Pull side section b out of the guides on the mounting plate. ^ Loosen the 4 screws (Torx 15) in the mounting plate, and remove the handle. ^ Remove the cover caps from the opposite side, and fit them into the empty holes. ^ Pull door handle a towards you. Side section b slides back, creating a gap d between side section b and mounting plate c. [. . . ]