User manual DE DIETRICH DTI1168CE

[. . . ] This guide will help you to quickly familiarise you with all the features of the appliance. Contents EN 1/ 2/ 3/ 4/ 7/ 8/ 11/ Description of your appliance Overview / working principle Quick start guide Product / Safety features explained Cleaning and maintaining your appliance Installation guide Help Guide Description EN DTi1049X Total dimensions (L x l)X DTi1049 : 93cm x 51cm Cut­out Recess (L’ x l’) DTI1049X : 90cm X 49cm Power : DTI1053X :9200W DTI1053XE : 7200W As shown in this logo, the materials used to package this appliance are not recyclable. Please dispose of them by depositing them in municipal containers provided for this purpose and play a role in protecting the environment. Recycling of the appliances organised by your manufacturer will thus be undertaken in optimum conditions, in accordance with European directive 2002/96/CE relating to electrical and electronic equipment waste. Contact your local authority or retailer for how to have used appliances collected or collection points. 1 Working Principle A B C Induction coils Glass insulating hob top Ferrous pan base EN The induction principle The principle of induction is based on a magnetic effect. [. . . ] Clean the hob or remove the object, then begin cooking again. Temperature limiter. Each cooking zone is equipped with a safety sensor that constantly monitors the temperature of the bottom of the cookware. If you leave empty cookware on a zone which is turned on, it will automatically limit the power in order to prevent damage to the cookware or hob. Residual heat. After a long cooking period, the zone used can remain hot for several minutes. If you forget cooking is in progress, after a predefined time, this safety function will automatically turn off your hob (from 1 to 10 hours depending on the power setting). A beep will confirm your setting. Automatic Pan Detection: detects when a suitable pan is placed on the cooking zone and so eliminates the possibility of the hob being activated accidentally by a non-suitable object. “Small Items” safety. By placing a small object on the area (a ring, a fork, etc), the hob will detect it and not deliver any power. Note: However, several small objects at the same time on a zone could be identified as cookware. Do not place any utensils (spoons, forks, covers, etc) on the cooking zone being used. They will heat up in the same way as cookware: Risk of combustion. 4 Additional Functions and Safety Features EN Child Lock: for added peace of mind, the child lock can be manually activated to prevent accidental start-up. To activate the lock pres the “I” key and hold until a beep is sounded and an indicator appears. To de-activate hold the “I” key until the indicator goes out and a beep sounds. Control Lock: can be activated to lock the control panel during the cooking process. This will lock the controls set on the cooking zones but will allow the stop key to function. This is activated in / deactivated in the same way as the child lock. Clean lock This function allows you to temporarily lock your hob while cleaning. Electronic Power Monitor: prevents power surge and de-surge in the event of electrical interference without loss of performance to the hob. •Independent timer. - At the end of your adjustment “t” becomes fixed and the count begins. Note: You can stop a count in progress by keeping your finger on the touchpad of the selection on the display. Timer Function Each zone of the appliance can be controlled by using the timer function to turn off the zone after a set period of time. [. . . ] The use of sealants may result in the appliance being unserviceable and as such may be excluded from warranty repairs. 9 Installation Guide Electrical connection EN Hook-up of 220-240V ~32 amp Hook-up of 220-240V ~16 amp •Hook-up of 2x230V 2L+2N ~ - 16A •Hook-up of 400V 2N ~ - 16A •Hook-up of 400V 3~ - 16A 10 Help Guide Problems on installation Posssible Causes A special code / display ap­ Working normally pears across the ccontrol panel Your installation blows a fuse Incorrect electrical connection / trip Only 1 side of the appliance works Incorrect electrical connection The hob produces an odour during the first cooking ses­ sions New appliance EN What should you do? Nothing this code will turn off after 30 seconds or if the zone is turned on Check electrical supply connection Check electrical supply connection Nothing. The smell will disapear with use. Problems after switching on You observe that Possible causes What should you do? The hob does not operate and The machine is not switched Check electrical supply, mains there are no indicator lights on or correctly connected to switches / circuit breaker / on the display. fuses The hob is not working and an The appliance has detected a Call the after sales service “F” code is displayed (Excep­ fault department tion of “F7” shown on next section) The hob does not function and displays the lock symbol The hob is locked Please refer to child lock fea­ ture. 11 Help Guide Problems while in use You observe that. Possible causes What should you do The hob has stopped working The hob has detected an and “­” is displayed also an aud­ overflow or object covering able beep is heard the controls. [. . . ]