User manual DE DIETRICH DOD1278X

[. . . ] In the DE DIETRICH line of products, you will also find a wide range of cookers, hobs, ventilation hoods, dishwashers, built-in refrigerators, which can be coordinated with your new DE DIETRICH oven. Of course, in an ongoing effort to better satisfy your demands with regard to our products, our after-sales service department is at your disposal and ready to listen in order to respond to all of your questions and suggestions (contact information at the end of this booklet). You can also log on to our website : www. dedietrich-electromenager. com where you will find our latest innovations as well as useful and additional information. [. . . ] After these three steps, the oven heats up : At any time, you can check the cooking time by pressing the button. fig. 2 At the end of cooking (end of programmed time), A series of beeps will be emitted when the oven stops, - the cooking time indicator and 0:00 both start to flash (fig. 3), - a series of beeps sounds for a few minutes. The beeping can be stopped by pressing Start. fig. 3 28 99644001_A_ml. qxp 21/12/2007 10:36 Page 29 2 / USING YOUR APPLIANCE EN PROGRAMMED COOKING - Cooking with delayed start and chosen cooking end time Proceed as with programmed cooking. - Select the desired cooking mode and adjust the temperature (see paragraphe : instant cooking). - Press the button until the cooking end time indicator starts to flash . The display flashes to indicate that you can now adjust the setting (fig. 1). After these 3 steps, oven heating is delayed so that cooking ends at 14:00. fig. 2 fig. 1 At the end of cooking (end of programmed time), - the oven turns off; - the cooking time indicator and 0:00 both start to flash (fig. 3), - a series of beeps sounds for a few minutes. In the case of programmed cooking cycles, the cavity lights up until cooking begins, and remains lit until cooking is finished. fig. 3 29 99644001_A_ml. qxp 21/12/2007 10:36 Page 30 EN 2 / USING YOUR APPLIANCE USING THE TIMER FUNCTION - Your oven's programmer can be used as an independent timer that allows you to count down a time without operating the oven. and 0m00s flash in the dis- - Adjust the chosen time by pressing the + ou buttons (fig. 2). fig. 2 - Press the button for a few seconds to turn off the timer. The display stops flashing after a few seconds and the timer starts working, counting down the time in seconds. Once the time has expired, the timer emits a series of beeps to notify you. The display returns to the time of day. Warning It is possible to change or cancel the timer at any time. 30 99644001_A_ml. qxp 21/12/2007 10:37 Page 31 2 / USING YOUR APPLIANCE EN CUSTOMISING THE RECOMMENDED TEMPERATURE Select the cooking function. If you wish to customize the recommended temperature : - Hold down the C button for a few seconds until the temperature figures start to flash. - For subsequent cooking programmes, the temperature you have just entered will be taken into account. LOCKING THE CONTROLS (CHILD SAFETY) OVEN OFF You have the option of preventing access to the oven controls by taking the following steps: when the oven is off, hold down the + and buttons for a few seconds (fig. 1), a "key" appears on the display -> access to the oven controls is now locked (fig. 2). [. . . ] The end of cooking time flashes to indicate that it is now possible to set it (fig. 1) - Press the + or - button to set the desired end time (fig. 2). - After these steps, the beginning of pyrolysis is delayed so that it finishes at 2 hours 30. fig. 2 fig. 1 35 99644001_A_ml. qxp 21/12/2007 10:37 Page 36 EN 5 / NOTES 36 99644001_A_ml. qxp 21/12/2007 10:37 Page 37 6 / AFTER-SALES SERVICE EN REPAIRS Any repairs that are made to your appliance must be handled by a qualified professional authorised to work on the brand. [. . . ]