User manual DE DIETRICH DHT945X

[. . . ] 24 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Device Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you wish to discard the changes you made click the Reset to Default button Day/Night Mode The DHT945X allows users to record data in day and night mode. You can select it to run automatically, manually, in constant day mode or constant night mode. © Copyright 2012 TRENDnet. 18 TRENDnet User's Guide . TV-IP572P / DHT945X Action Recording This screen shows the SD Card parameters. There are three main sections: Trigger By: Always, Motion, Schedule, Recording: Configure the recording options SD Card: Recording files size © Copyright 2012 TRENDnet. 19 TRENDnet User's Guide Trigger By - Always This option allows you to record constantly. If you select Always bear in mind that the Recording Type should be Video and that the source usually comes from Profiles 1, 2 or 4 under Source. Make sure the SD Card settings are setup to accommodate the huge storage space required for Always connections. Click Apply to complete the configuration. TV-IP572P / DHT945X the camera will start recording before the allotted time schedule. Click Apply to complete the configuration. Trigger By ­ Schedule This option allows you to record according to the schedule you setup. Here you can select from each day's checkbox which days you want to setup and you can create a start and end time. Snapshot takes a picture from your recorded data and only works with Profile 3. If you wish to format your SC card at any time. , click the Format SD Card button. TV-IP572P / DHT945X Motion Detection These settings control the motion detection settings on the camera. Motion detection allows you to designate an area in the cameras viewing angle to capture motion within that area. This is useful if you want to limit your recording to a particular size. Click the Enable Video Motion checkbox to activate motion detection. Sensitivity is based on the strength of the motion in the designated area. 0% means the strength is low and the system moves up incrementally to 100% full sensitive strength. Once you select Draw motion area, take your mouse and draw a rectangular area where you want the camera to detect the motion. If you want to remove the motion detection area select Erase motion area and the red blocked area will disappear. If you click the Clear button too it will also remove the motion detection area. This is useful when the camera is out of focus and comes back into focus at a later stage. Once you have set all setting options click Apply. © Copyright 2012 TRENDnet. 23 TRENDnet User's Guide Tools System TV-IP572P / DHT945X These settings allow you to save the recorded data to your local hard drive or retrieve it from the drive. [. . . ] TRENDnet vakuuttaa täten että TV-IP572P / DHT945X tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Härmed intygar TRENDnet att denna TV-IP572P / DHT945X står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Eesti [Estonian] English Español [Spanish] [Greek] Français [French] Italiano [Italian] Latviski [Latvian] © Copyright 2012 TRENDnet. 35 TRENDnet User's Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP572P / DHT945X ­ 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. [. . . ]