User manual DE DIETRICH DHG690XP1

[. . . ] When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at least 3 mm, such separating device ensuring disconnection from the main must be included in the fixed installation. If your unit features a power lead and plug, position this so the plug is accessible. Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. ATTENTION: This appliance must be grounded. [. . . ] When frying, take particular care to prevent oil and grease from catching fire. To avoid possible risks of fire always comply with the indicated instructions when cleaning anti-grease filters and when removing grease deposits from the appliance. MAINTENANCE Thorough servicing guarantees correct and long-lasting operation. Any fat deposits should be removed from the appliance periodically depending on amount of use (at least every 2 months). To clean painted appliances on the outside, use a cloth dipped in lukewarm water and neutral detergent. To clean steel, copper or brass appliances on the outside, it is always best to use specific products, following the instructions on the products themselves. To clean the inside of the appliance, use a cloth (or brush) dipped in denatured ethyl alcohol. DESCRIPTION OF THE APPLIANCE The description and characteristics shown in this document are for information only and not obligatory. Indeed, we reserve the right to carry out any modification or improvement of the quality of certain of our products without prior notice. As with all hoods, these apparatuses can be installed in either filtering version or duction version. 1), the air and vapours conveyed by the appliance are depurated by charcoal filter and recirculated around the room. ATTENTION: Using the hood as a filtering one it is necessary to use the charcoal filters that purifies the air sent back into the room. 2), cooking vapours and odours are conveyed straight outside by a disposal duct which passes through the wall/ceiling. - Gross weight: Kg. 8, 2 - Net weight: Kg. 7, 2 - 2 metallic grease filters Technical data - DHG356XP: - 1 Motor - power 155W - Voltage: 230-240V single phase - 2 halogen lamps 20W - Supplied with 150 cm electricity supply cable with plug. - Gross weight: Kg. 8, 4 - Net weight: Kg. 6, 9 - 1 metallic grease filter Technical data - DHG377XP: - 1 Motor - power 300W - Voltage: 230-240V single phase - 2 halogen lamps 20W - Supplied with 150 cm electricity supply cable with plug. - Gross weight: Kg. 10, 5 - Net weight: Kg. 9, 5 - 2 metallic grease filters Dimensions (Fig. 8 DHG316XP DHG356XP DHG376XP DHG377XP DHG386XP ELECTRICITY CONNECTION While connecting the electricity make sure that the tension is that indicated in the technical lable. Before proceeding to cleaning or maintenance operations remove the tension. Connecting the electricity must be performed by a specialised technician in conformity with the regulation in force. This apparatus is constructed so as to belong to the I insulation class and therefore needs grounding. MAINTENANCE REMOVE THE TENSION AT THE HOOD (PLUG or SWITCH) BEFORE ANY OPERATIONThorough servicing guarantees correct and long-lasting operation. -Maintenance of the casing: Avoid products containing abrasives when cleaning the casing. -Maintenance of the anti-grease filters: The anti-grease filters require regular maintenance and must be cleaned periodically every two months. Remove the anti-grease filters in correspondence with the handle, push the stop inward and pull the filter downwards (Fig. 9). Wash them with a normal neutral product in commerce, then rinse abundantly and dry. [. . . ] The washing can be carried out in the dishwasher making sure not to let the filters make contact with dirty or silver dishes. 9b -Maintenance of the carbon filters: If you are using the filtering version apparatus, the carbon filters (Ref. : DHK306AP1) need to be changed every six months on average depending on the use made of the hood. 9a, 9b) need to be removed first in order to remove the carbon filters. Remove the two metal filter retainers (M) and position the charcoal filter inside the grease filter; fit the two filter retainers back on again to secure the charcoal filter (Fig. 10). [. . . ]