User manual DE DIETRICH DHD1154X

[. . . ] Yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed. ) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Stand Base 2 NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. [. . . ] (Depending on model) IN (PC) (RGB/HDMI-PC) IN/OUT (RGB) 13/18V 700mA MAx LNB IN IN LAN RGB IN AUDIO AV1 Satellite ANTENNA /CABLE OPTICAL DIGITAL AUDIO OUT H/P 1(ARC) 2 NOTE AV IN COMPONENT 3 4(PC) 1 HDD IN 2 USB Hub ENGLISH ENG B type : LA69**, 42/47/55LA74** Buttons Screen Buttons OK SETTINGS INPUT OK SETTINGS INPUT Speakers Speakers Remote control sensor DE DIETRICH Logo Light Remote control sensor DE DIETRICH Logo Light (Only LA64**, LA66**) Power Indicator (Only LA62**, LN57**-ZE/ZK) C type : 60LA74** Screen Buttons D type : LN57**-ZA Screen Buttons OK SETTINGS INPUT OK SETTINGS Speakers Speakers INPUT Remote control sensor Power Indicator Description Scrolls H through the saved programmes. ASSEMBLING AND PREPARING 17 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Yy When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLISH ENG CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. Yy It is recommended to move the TV in the box or packing material that the TV originally came in. Yy Before moving or lifting the TV, disconnect the power cord and all cables. Yy When holding the TV, the screen should face away from you to avoid damage. Yy When transporting the TV, do not expose the TV to jolts or excessive vibration. Yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen. Make sure not to hold the transparent part, speaker, or speaker grill area. <Rear> <Front> Securing the TV to a wall (This feature is not available for all models. ) Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. lG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. 10 cm 10 cm ASSEMBLING AND PREPARING 21 Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Separate purchase(Wall Mounting Bracket) Model 32LA62** 32LN57** 200 x 100 M4 4 LSW130B 39/42LA62** 32LA64** 32LA66** 39/42LN57** 200 x 200 M6 4 LSW230B ENGLISH ENG CAUTION yy Disconnect the power first, and then move or install the TV. [. . . ] NOTE yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. H/P OUT (*Not Provided) English Transmits the headphone signal from the TV to an external device. [. . . ]