User manual DE DIETRICH DHD1087M

[. . . ] Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital LED display over cable. Although this LED display set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Depending on the countries/areas where this LED display set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. [. . . ] Reset: Resets the White Balance to it's default settings. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. x Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. x Adjust the angle of the product so that light is not reflected onto the screen. Gamma: Adjust the primary colour intensity. Motion Lighting (Off / On): Reduce power consumption by brightness control. English 24 Basic Features Picture Options MENUm Picture Picture Options ENTERE Sound Menu When connecting a PC, you can only make changes to the Colour Tone. Changing the Preset Sound Mode MENUm Sound Sound Mode ENTERE Picture Options Colour Tone Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode Standard Auto Auto Low Off Sound Mode t Standard: Selects the normal sound mode. Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. Mode is disabled. If Speaker Select is set to External Speaker , Sound Colour Tone (Cool / Standard / Warm1 / Warm2) Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. Settings can be adjusted and stored for each external device connected to an input on the LED display. Adjusting Sound Settings Sound Effect MENUm Sound Sound Effect ENTERE (standard sound mode only) SRS TruSurround HD(Off / On) t This function provides a virtual 5. 1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. SRS TruDialog (Off / On) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your LED display is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. When bar is green, you are receiving the best possible signal. MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. Source: Select a desired input source when the LED display is turned on automatically. (USB can be selected only when a USB device is connected to the LED display) Aerial (when the Source is set to TV): Select ATV or DTV. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the LED display is turned on automatically. NOTE Time Zone (Auto / Manual) (depending on the country): Select your time zone. GMT(GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00): Selects your time zone. This function is only available when the Time Zone is set to Manual. x x x x If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. When there is only one photo file in the USB, the Slide Show will not play. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. It is recommended that you use a USB memory stick and a multi card reader when using On Timer. [. . . ] These pixels will have no impact on the performance of the product. Storage and Maintenance If you attched some stickers on the LED display screen, it remains some debris after removing the sticker. Please clean it to watch LED display. The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches. Do not spray water or a cleaning agent directly onto the product. Clean the product with a soft cloth dapped in a small amount of Any liquid that goes into the product may cause a failure, fire, or water. [. . . ]