User manual CANDY GVW 5117LWHCS-S

[. . . ] We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Com to gain faster access to supplementary services solely reserved to our most loyal customers. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the after carefully reading We recommend you manual on hand and in any future owners. [. . . ] L Thanks to electronic control, the water in the intermediate phases is emptied silently, making this option very useful for washing at night. Press the MEMORY button for about 3 seconds to save the combination in the position M1. That is already KEY LOCK l Pressing simultaneously the buttons NIGHT & DAY and DELAY START for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. Pressing the two buttons simultaneously again or by turning the program knob to OFF. 2) Start a program memorized l The key lock can be simply cancelled by l Press briefly the MEMORY button (once for M1, twice for M2) and press the START/PAUSE button. L Once you recall a memorized program, you can still change its options and settings, pressing the corresponding keys. If you accidently select a memorized program, simply turn the program knob to select another one. Digital Display The display’s indicator system allows you to be constantly informed about the status of the machine. 1 15 3 2 7 7 13 14 7 6 10 16 12 5 NIGHT & DAY button l This option reduces the intermediate spin speed to 400 rpm, where applicable, increase the water level during rinsing and keep the laundry immersed in water after the final rinse, in order to spread the fiber perfectly. 8 7 9 11 7 4 1) DOOR LOCKED INDICATOR LIGHT l The indicator light is illuminated when the door is fully closed. L During the phase in which the water is held in the tub, the relevant indicator light blink to show that the machine is at a standstill. L Deselect the option to end the cycle with a spin dry (which may be reduced or l When START/PAUSE is pressed on the machine with the door closed, the 16 indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. In this case, close the door in the proper way and press the START/PAUSE button. L If automatic washing/drying is selected, at the end of the wash phase, the drying time remaining to the end will be shown on the display. 5) STAIN LEVEL l A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. 2) SPIN SPEED l Once the programme has been selected, the indicator light will automatically show the stain level set for that programme. L Selecting a different stain level the relevant indicator will light up. 6) EXTRA RINSES This show the spin speed of the selected programme that can be changed or omitted by the relevant button. 3) WASH TEMPERATURE This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. [. . . ] CUSTOMER SERVICE CENTRE AND WARRANTY EN If you believe the washing machine is not working correctly, consult the quick guide provided below with some practical tips on how to fix the most common problems. Problem The washing machine does not work/start Possible causes and practical solutions Make sure it is correctly plugged in. Check whether the required program was correctly selected and to have correctly started the machine. Make sure the fuse has not blown and that the wall socket is working, testing it with another appliance such as a lamp. [. . . ]