User manual CANDY GVW 364TC-S

[. . . ] We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Com to gain faster access to supplementary services solely reserved to our most loyal customers. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Environmental conditions This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). [. . . ] EXTRA RINSE button l This button allows you to add rinses at the end of the washing cycle. The maximum number of extra rinses is related to the programme selected. L During the phase in which the water is held in the tub, the relevant indicator light blink to show that the machine is at a standstill. L Deselect the option to end the cycle with a spin dry (which may be reduced or cancelled using the appropriate button) and emptying phase. L This function has been studied for the people with delicate and sensitive skin, for which also a least residue of detergent can cause irritations or allergies. L Thanks to electronic control, the water in the intermediate phases is emptied silently, making this option very useful for washing at night. L It advises to also use this function for the children items and in case of washings of very dirty items, for which it is due to use a lot of detergent, or in the washing of toweling items whose fibres mostly have the tendency to hold the detergent. DRYING SELECTION button l Ensure that the programme selector is not in the OFF position then press the button to select the required drying programme: an indicator will light to display the drying result selected each time you press the button. OPTIONS button You can choose between three different options: - PREWASHING l This option allows you to make a prewash and it is particularly useful for heavily soiled loads (can be used only on some programmes as shown in the table of programmes). L To cancel the cycle during the drying phase, hold the button down for about 3 seconds until the cooling indicator lights up. L We recommend you use only 20% of the recommended quantities shown on the detergent pack. - HYGIENE l With this option it is possible to hygienize the clothes, the washing programme reach a temperature of 60°C. L Given the high temperature inside the drum, we recommend that you allow the dryer to complete the cool down period before returning the programme selector to the OFF position and removing the laundry. 40 Digital Display The display’s indicator system allows you to be constantly informed about the status of the machine. The wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. 2) SPIN SPEED 2 3 4 5 6 7 11 1 This show the spin speed of the selected programme that can be changed or omitted by the relevant button. 3) WASH TEMPERATURE 8 9 10 3 1) DOOR LOCKED INDICATOR LIGHT This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. 4) CYCLE DURATION 1 l The indicator light is illuminated when the door is fully closed. 4 l When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected. L When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. L Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically delete. [. . . ] CUSTOMER SERVICE CENTRE AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below with some practical tips on how to fix the most common problems. Problem The washing machine does not work/start Possible causes and practical solutions Make sure it is correctly plugged in. Check whether the required program was correctly selected and to have correctly started the machine. Make sure the fuse has not blown and that the wall socket is working, testing it with another appliance such as a lamp. [. . . ]