User manual CANDY CDI 2515

[. . . ] Please read this booklet carefully as it provides important information regarding the safe installation, use, and maintenance of the machine, together with some useful advice on how to achieve the best results from your dishwasher. For future reference please keep this instruction booklet in a safe place. Your new appliance is fully guaranteed by the manufacturer for 12 months against electrical/mechanical breakdown excluding: A. Any faults which occur due to bad installation or misuse of the machine. [. . . ] Dishes can now be removed and the dishwasher turned off by pressing the "ON/OFF" button or dishes can be loaded for new cycle. If malfunctions or faults occur when a programme is running the indicator light that corresponds to the selected cycle (2 indicator lights for the "COLD RINSE" programme) will flash rapidly and the alarm sounds. In this event, turn the dishwasher off by pressing the "ON/OFF" button. After checking to make sure the water inlet hose tap is open, that the drain hose is not bent and that the siphon or filters are not clogged, set the selected programme again. IMPORTANT This dishwasher is equipped with an anti-overflow safety device which will automatically discharge any excess water should a problem occur. After pressing the "ON/OFF" button, the indicator light which is factory set at "recommended" will flash. If you wish to select an option, press the option button (the corresponding indicator light will light up). WITHIN 2 minutes of the programme commencing another programme can be selected, simply by pressing the corresponding button. Hold down the current programme button (with the indicator light on) for at least 5 seconds. the programme indicator lights (except for the "RAPID" programme indicator light) will flash. The running programme will be cancelled and the indicator light for the "recommended" programme will start to flash. "HALF LOAD" button In response to your everyday washing requirement in addition to the normal wash functions this dishwasher is equipped with the "HALF LOAD" function. This function enables the uses to wash a reduced number of dishes yet retaining the freedom of loading them both on the top and bottom basket. When this function is activated the dishwasher will automatically reduce the water and energy consumption and the wash time. To ensure the correct operation of the anti-overflow safety device, we recommend that the dishwasher is not moved or tilted during operation. If however it is necessary to tilt or move the dishwasher, please ensure that the washing cycle is complete and that there is no remaining water inside the dishwasher. The water-stop device protects against water damages caused by leaks on the fill hose which could develop due to natural ageing of the hose. In the water-stop system the leaking water fills the corrugated hose and activates a stop valve which cuts off the water supply to the machine. If the hose is not long enough for correct connection, it must be replaced with a longer one. Depending on the source of the supply, water contains varying amounts of limestone and minerals which are deposited on the dishes leaving whitish stains and marks. [. . . ] Once a day - for heavily soiled pans and any other items that have been left all day for washing. Quick wash for dishes which are to be washed immediately after the meal. Short cold pre-wash for items that are stored in the dishwasher until you are ready to wash a full load. Wash with prewash If setting the HYGIENIC wash programme, a second dose of about 20 g of detergent (1 table-spoon) must be added directly in the machine. [. . . ]