User manual BRITAX B-SMART

[. . . ] For use up to 6 months, thread the shoulder straps through the lower belt slots in the backrest. Pushchair seat from birth to 15 kg The pushchair can be used with all Britax B-SMART and B-DUALseats marked with the pushchair seat symbol "Type A". As a travel system with infant carrier from birth to 13 kg The pushchair can be used as a travel system with all Britax/RÖMER infant carriers that are equipped with the "Type A" adapter. The soft carrycot / carrycot is only intended for babies that cannot sit up, roll over or support themselves on their hand and knees yet. [. . . ] Even if the brake is engaged, the draught from the vehicle can move the pushchair. Take your child out of the pushchair and fold the pushchair before you carry it on stairs or use an escalator. Push the brake pedal 14 down until Always check if the brakes have engaged firmly before parking the pushchair. How to release the brakes 14: Push the brake pedal 14 down until The green marking is visible in the indicator window 62. Always lock the swivel wheels 5 if you are using the pushchair on an uneven surface. How to lock the swivel wheels 5 : B-SMART 4 How to adjust the swivel wheels 5 so that they can pivot: B-SMART 4 How to adjust the handle 2 to your body height: Using the pushchair seat The B-SMART can be used with all Britax B-SMART and B-DUAL seats marked with the pushchair seat symbol "Type A". Always take your child out of the pushchair seat before you fasten the seat to the pushchair or remove it. A correctly adjusted 5-point harness gives your child the necessary support in the pushchair. For children under 6 months the shoulder straps 17 must run through the lower belt slots 15. For children over 6 months the shoulder straps can run through the upper belt slots 15. If using an alternative harness conforming to BS6684, D ring attachments are found on each side of the pushchair. Push the buckle tongues 47 back Check for correct fitting by pulling So sichern Sie Ihr Kind mit dem Gurtzeug: How to secure your child using the harness: Always re-adjust the harness when changing the seating position of your child. Push on the buckle housing 18 from Use the pushchair for children under 6 months only with the backrest 20 reclined all the way back. How to put the leg support 23 up: How to put the leg support 23 down: Push the two buttons 22 on both Swivel the leg support 23 Opening the hood window 30: Support 23 from below. Please refer to the user instructions supplied with your child safety seat. The B-SMART can be used as a travel system with all Britax/RÖMER infant carriers that are equipped with the "Type A" adapter. The adapter is simply clipped from underneath into the edge of the infant carrier or is already integrated into the infant carrier. Always apply the brake before fitting the infant carrier onto the pushchair or removing it. With the infant carrier in a rearwardfacing position, lift it above the pushchair. If your child safety seat is equipped with an integrated travel system adapter, the appropriate description can be found in the user instructions supplied with your child safety seat. Push up the release button 29 on Keep a firm grip on the infant carrier while doing this. You can now remove the infant The B-SMART can be supplemented with a soft carrycot, a raincover 40 and a cosytoes 41. [. . . ] For this car/bicycle child seat / pushchair we provide a 2-year warranty against manufacturing or material defects. As proof we ask that you fill out the Warranty Card and retain it for the whole term of the warranty period, together with the Transfer Check signed by you and your sales receipt. In the case of a warranty claim, the Warranty Card must be returned together with the product. The Warranty covers only car/bicycle child seats / pushchairs which have been handled properly and which have been sent to us in a clean condition. [. . . ]