User manual BRITAX B-MOTION

[. . . ] Þ If your stroller is to be used by other people who are not familiar with it (such as grandparents), always show them how the stroller is used. Þ Your child’s safety may be put at risk if you do not follow these instructions. Þ Keep the user instructions carefully so you can also look through them later. If you have any questions regarding use or need further information, please contact us. [. . . ] Always re-adjust the harness when changing the seating position of your child. The Britax B-Motion is approved for three different uses: This stroller (travel system) has been developed and manufactured according to standards EN1888:2012 and EN1466: 2004. Until your child can sit up (around 6 months), please only carry it in a sleeping position with the back support horizontal. For children under 6 months, pass the shoulder belts through the lowest belt slots in the backrest. 20 The stroller can be used as a travel system with all Britax/Römer infant carriers that are equipped with the “Type A” adapter. An infant carrier may generally only be transported facing backwards on the stroller. When used as a travel system, please follow the instructions for your infant carrier. As a travel system with infant carrier used in conjunction with chassis, this vehicle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot or bed. The stroller can be used with all Britax stroller attachments that are marked with the symbol stroller attachment "Type A". When used with the stroller attachment, please follow the instructions for your stroller attachment. A stroller attachment may generally only be transported facing backwards on the stroller. For at undgå kvæstelser skal du altid sørge for at holde dit barn på afstand, når du folder dette produkt ud eller sammen. Skulle dit barn have brug for at sove skal det placeres i en egnet barnevognslift, vugge eller seng. CHECK TIRE PRESSURE Plastic wheels are rated to a maximum tire inflation pressure of 28 pounds per square inch (psi) (1. The maximum inflation pressure is embossed on the wheel next to the valvestem. 9 bar can damage the wheel and/or tire resulting in loss of control and injury. The maximum inflation pressure is embossed on the wheel next to the valve stem. [. . . ] Fabrics: All our fabrics meet the highest requirements in terms of colour fastness to UV radiation. This is not a material defect, but normal wear and tear for which no warranty is given. Buckle: If any problems occur on the buckle, these are often due to dirt that can be washed out. For this we refer you to the general terms and conditions displayed at the dealership. [. . . ]