User manual BRAUN 190S-1

[. . . ] This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children. Children should be supervised to ensure that they do not play with the appliance. [. . . ] Frequent use of the long hair trimmer may reduce the battery capacity (model 190s only). Tips for the perfect shave For best shaving results, Braun recommends you to follow 3 simple steps: 1. Stretch your skin and shave against the direction of your beard growth. Cleaning The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean (b): Model 190s only: • Switch the shaver on and rinse the shaver head under hot running water. € Next, switch off the shaver, remove the shaver foil (2) and cutter block (3). € If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil (d). Model 170s only: • After each shave, rinse the shaver head under hot running water (b). 12 09:15 Alternatively, you may clean the shaver using the brush provided (c): • Switch off the shaver. € Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this will damage the foil. Keeping your shaver in top shape About every four weeks, clean the cutter block with Braun cleaning agents. Put a drop of light machine oil onto the long hair trimmer and the shaver foil (d). Replacing the shaver foil and cutter block To maintain 100% shaving performance, replace the shaver foil (2) and cutter block (3) at least every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil and cutter block: 10B) Preserving the batteries (model 190s only) In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time. [. . . ] For UK only: This guarantee in no way affects your rights under statutory law. Opis 1 2 3 4 5 6 7 Ochronna os∏ona na foli´ Folia golàca G∏owica golàca Trymer do d∏u˝szego zarostu Wskaênik ∏adowania (tylko model 190s) W∏àcznik/wy∏àcznik Specjalny przewód zasilajàcy Ładowanie (tylko model 190s) Golark´ najlepiej jest ∏adowaç przy temperaturze otoczenia mi´dzy 15 °C a 35 °C. Opis 1 2 3 4 5 6 7 Za‰titna kapica MreÏica Blok noÏa Trimmer (Rezaã za duge dlaãice) Lampica punjaãa (samo model 190s) Prekidaã za ukljuãivanje/iskljuãivanje aparata Niskonaponski prikljuãni kabel Punjenje (samo model 190s) Preporuãujemo da temperatura okoli‰a u kojem punite svoj aparat bude od 15 °C do 35 °C. [. . . ]