User manual BRANDT TI313
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BRANDT TI313. We hope that this BRANDT TI313 user guide will be useful to you.
Manual abstract: user guide BRANDT TI313
Detailed instructions for use are in the User's Guide.
[. . . ] Programme guide
23
Washing programmes
Programme Degree of soil and type of load Starting Require position of the push button programme selector
Recommended quantity of detergent
Cycle description
Wash
Prewash
Normal 65°c with prewash
Normal soil Crockery and cutlery
A
65° + On/Off
25 g
5g
Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Main wash up to 50°C 1 cold rinse 1 hot rinse 1 cold rinse (to avoid food scraps from sticking together).
Normal 65°c no prewash
Light soil Crockery and cutlery
B
65° + On/Off
30 g
/
* Bio 50°c with prewash
Bio 50°c no prewash
Normal soil Crockery and cutlery
A
50° + On/Off 50° + On/Off
25 g
5g
Light soil Crockery and cutlery
B
30 g
/
** Quick wash
50°c
Light soil Crockery and party crockery Any. Partial load (to be completed later in the day).
C
50° + On/Off
30 g
/
Rinse & Hold
D
On/Off
/
/
*
Testing programme for EN 50242 (see "Hints for Test Centres").
** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so
that you may re-use them promptly.
24
Operating sequence
1. Check the filters
Ensure they are clean and properly positioned (see "Maintenance and cleaning").
9. [. . . ] At the end of the washing programme
At the end of the programme the dishwasher will automatically stop.
2. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Switch off the dishwasher
Switch off the dishwasher by pressing the On/Off push button and open the door. Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
4. Measure out detergent
Add the required amount of detergent into the dispenser according to the "Washing programmes" chart. Close the detergent dispenser lid.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Move the front runner stops (A) of the upper basket outwards and slide the basket out. Refit the basket in the higher position and replace the stops (A) in their original position.
RC01
A
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks.
After loading your machine always close the door, as an open door can be a hazard.
27
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser Test standard: Reference programme: Load: Rinse aid selector: Detergent dosage: EN 50242 Bio 50°c with prewash 12 standard place settings position 5 25 g in the dispenser 5 g on the dispenser lid
US57
UI49
UI72
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Technical specifications
Dimensions Width Height Max depth Max depth with open door Voltage 59. 6 cm 81. 8 - 87. 8 cm 57. 5 cm 111. 4 cm 230 V - 50 Hz 200 W 2100 W 2300 W 50 kPa (0. 5 bar) 800 kPa (8 bar) 12 place settings
Electrical connection Motor rating during wash Power of heating element Overall power Water supply pressure
Minimum Maximum
Capacity
28
Protection against flooding
In order to prevent water floods, the machine has been provided with two devices, having the following characteristics:
1. In the water inlet hose:
The water supply hose is fitted with a safety device, which prevents water from entering the machine should the inner hose split, due to wear. It operates even with the machine off The problem is signalled by a red indicator which appears in the window (B - ). The retaining ring (A - ) must be properly fitted so as to avoid water leaks. Only for water supply hoses with Lock-fast safety device to prevent inadvertent loosening. To detach the hose press yellow lever (C - ) and turn the retaining ring anticlockwise .
A
2
B A C B
1
CA13
2. In the bottom of the machine:
This device will operate if there are any water leaks in the machine, however it will only operate if the machine is on. [. . . ] To detach the hose press yellow lever (C - ) and turn the retaining ring anticlockwise .
A
2
B A C B
1
CA13
2. In the bottom of the machine:
This device will operate if there are any water leaks in the machine, however it will only operate if the machine is on. In case of intervention, turn off the water tap and call the Service Force Centre. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BRANDT TI313
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BRANDT TI313 will begin.