User manual BOSCH ART 26 ACCUTRIM

[. . . ] Remove battery before adjusting or cleaning, and before leaving the machine unattended for any period. Do not work in the rain or leave the trimmer outdoors whilst it is raining. S Never operate the trimmer with damaged guards or shields or without guards or shields in position. [. . . ] Hook the guard onto trimmer head and push until The battery is fully charged as soon as the LED 4 switches from flashing to being lit continuously. It is recommended not to remove the battery until the battery is fully charged. The rapid-charging procedure is possible only when the temperature of the battery is between 0 °C and 45 °C. Note: The position of the wheels can be adjusted by loosening the wingnut 18 and moving to the desired position. B3 The wheels can be moved up and down the shaft 6 depending on the height of cut required. fitting Cutting Disc/Fitting Blade C Press cutting disc 20 onto drive adaptor as shown (click). D Fit the blade, place the blade 22 over the pivot 21 and pull outwards until it snaps into place. With the battery fully charged, the charger immediately switches to trickle-charge mode. E Using Adjustable Handle The adjustable handle 4 can be set in various positions: To change the position undo the handle wing nut 3 and move the adjustable handle 4. K Cutting Grass Move the trimmer left and right, keeping it well away from the body. Do not allow the cutting line to contact paved surfaces, stones or garden walls, since this will wear the blade rapidly. M For better control use the plant protector 9 (ART 26/2600 ACCUTRIM only ­ available as an accessory for ART 23/2300 ACCUTRIM) as a guide. N Cutting Around Trees and Bushes Carefully cut around trees and bushes so that they do not come into contact with the cutting line. M For better control use adjustable handle 4 and use the plant protector 9 (ART 26/2600 ACCUTRIM only ­ available as an accessory for ART 26/2600 ACCUTRIM). [. . . ] As soon as the battery temperature is within the allowable temperature range again, the battery charger automatically switches to rapid charging Corrective measure: Clean the contacts (e. The battery is defective, due to a disconnection in the battery (individual cells) The LED indicator 14 The charger plug is not inserted (propdoes not light up after erly) plugging the mains plug Socket, cable or charger are defective into the socket and inserting the battery into the charging compartment 16 Insert the plug (fully) into the socket Check the mains voltage and if necessary, have the battery charger checked by an authorized customer service station for Bosch power tools Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only for EC countries: Do not dispose of power tools into household waste! [. . . ]