User manual BOSCH ARM3650-ART23SL


If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH ARM3650-ART23SL. We hope that this BOSCH ARM3650-ART23SL user guide will be useful to you.

BOSCH ARM3650-ART23SL : Download the complete user guide (8504 Ko)

Manual abstract: user guide BOSCH ARM3650-ART23SL

Detailed instructions for use are in the User's Guide.

[. . . ] ς Never pick up or carry the machine while the motor is running. Unauthorized modifications may impair the safety of your product and may result in increased noise and vibration. Do not connect damaged cables to the supply or touch a damaged cable before it is disconnected from the supply. Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and before leaving the garden product unattended for any period. [. . . ] ς Do not run over, crush or pull the power supply cable or extension lead, otherwise it may be damaged. ς The extension lead must have a cross section in accordance with the operating instructions and be protected against splashed water. ς Always wear gardening gloves when handling or working near the sharp blades. If the supply cord is damaged, it must be replaced by a Bosch Service Centre. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, damaged or entangled. ς The blades continue to rotate for a few seconds after the machine is switched off. Your machine is double insulated for safety and requires no earth connection. Extension cords/leads should only be used if they comply with H05VV-F, H05RN-F types or IEC type design (60227 IEC 53, 60245 IEC 57). If you want to use an extension cable when operating your product, only the following cable dimensions should be used: – 1. Length 100 m Note: If an extension cable is used it must be earthed and connected through the plug to the earth cable of your supply network in accordance with prescribed safety regulations. If in doubt contact a qualified electrician or the nearest Bosch Service Centre. Extension cable, plug and socket must be of watertight construction and intended for outdoor use. It is recommended for increased electrical safety to use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. For products not sold in GB: WARNING: For your safety, it is required that the plug attached to the machine is connected with the extension cord. The coupling of the extension cord must be protected against splash water, be made of rubber or coated with rubber. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. Maintenance  Always wear gardening gloves when handling or working near the sharp blades. [. . . ] Book Page 11 Wednesday, October 2, 2013 8:30 AM English | 11 Mounting and Operation Action Delivery Scope Wheel Assembly Handle Assembly Snap together the Grassbox Grassbox fitting/removing Figure 1 2 3 4 Action Adjusting the Cutting Height Starting Stopping Working Advice Blade Maintenance Selecting Accessories Figure 5 6 6 7 8 9 Troubleshooting STOP Problem Motor refuses to start Possible Cause Power turned off Mains socket faulty Extension cable damaged Fuse faulty/blown Grass too long Motor protector has activated Extension cable damaged Internal wiring of garden product damaged Motor protector has activated Garden product leaves ragged Height of cut too low finish Cutting blade blunt and/or Possible clogging Motor labours Machine functions intermittently Blade fitted upside down Blade not rotating while garden Cutting blade obstructed product switched on Blade nut/bolt loose Blade nut/bolt loose Cutting blade damaged Excessive vibrations/noise Corrective Action Turn power on Use another socket Inspect cable, replace if damaged Replace fuse Increase height of cut and tilt garden product to reduce starting load Allow motor to cool and increase height of cut Inspect cable, replace if damaged Contact Service Agent Allow motor to cool and increase height of cut Increase height of cut Replace the blade Check underneath the garden product and clear out as necessary (always wear gardening gloves) Refit blade correctly Switch off garden product Clear obstruction (always wear gardening gloves) Tighten blade nut/bolt (17 Nm) Tighten blade nut/bolt (17 Nm) Replace the blade After-sales Service and Application Service www. Com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product. Com Only for EC countries: According to the European directive 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national law, electrical and electronic equipment that are no longer usable must be collected separately and disposed of in an environmentally correct manner. For græs (brug altid havehandsker) Montér kniven rigtigt Sluk for haveværktøjet Fjern tilstopning (brug altid havehandsker) Spænd knivmøtrikken/-skruen (17 Nm) Spænd knivmøtrikken/-skruen (17 Nm) Kniv skiftes Når haveværktøjet tændes, drejer kniven ikke For stor vibration/støj Kundeservice og brugerrådgivning www. [. . . ]


Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH ARM3650-ART23SL will begin.


Copyright © 2015 - manualRetriever - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.