User manual BONTRAGER SEATPOST

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BONTRAGER SEATPOST. We hope that this BONTRAGER SEATPOST user guide will be useful to you.


BONTRAGER SEATPOST : Download the complete user guide (160 Ko)

Manual abstract: user guide BONTRAGER SEATPOST

Detailed instructions for use are in the User's Guide.

[. . . ] Madison Street Waterloo, Wisconsin 53594 © Copyright Trek Bicycle Corporation 2004 All rights reserved The seat, the part you sit on when riding a bike, is held in place by the seatpost (Figure 2). Proper adjustment of each component is important for your comfort and pedaling efficiency. This section explains how to inspect, adjust, and lubricate your seatpost. Inspect your seatpost regularly Every month inspect the seatpost quick-release lever, or seat post binder bolt, and seat fixing bolt (Figure 2) for proper tightness. [. . . ] Generally, it is easier to remove the saddle with the seatpost held firmly in the bike frame. However, the old seatpost may be corroded slightly, making removal or the seatpost difficult without the seat attached for leverage and grip. These instructions explain how to remove a seatpost that may be slightly corroded. To remove an old seatpost Loosen the seatpost binder bolt. Twist the saddle to loosen and partially remove the seatpost from the frame. Loosen the saddle clamp bolts enough to remove the saddle from the saddle clamp. Visually inspect the top edge and interior surface of the seat tube for burrs or deformation that might mar the seatpost. If there are any rough spots or burrs, remove them before going to the next step. Grease the seatpost, except for models with a carbon fiber seatpost tube. Apply a light bearing grease to the seatpost where it inserts into the seat tube. This helps prevent galvanic corrosion where the aluminum seatpost can chemically bond to the steel, aluminum, carbon, or titanium seat tube. Some manufacturers tell you not to grease the seatpost with some frames. As an example, Trek says that a special insert inside the seat tube of OCLV carbon frames means you should NOT grease a seatpost inserted into an OCLV frame. locations To install the saddle Figure 3- Bontrager saddle rails clamping mechanism 1. Slide the saddle rails into the rail grooves of the compression wedges. [. . . ] This warranty is expressly limited to the repair or replacement of a defective item and is the sole remedy of the warranty. This warranty extends from the date of purchase, applies only to the original owner, and is not transferable. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BONTRAGER SEATPOST




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BONTRAGER SEATPOST will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.