User manual BMW INSTRUMENT CLUSTER SIA RESET E38 E39 E46 E53 E54

[. . . ] INSTRUMENT CLUSTER SIA RESET Model: E38, E39, E46, E52, E53 Production Date: E46 from 9/99 E38, E39, E53 from 9/00 On 2001 vehicles without the diagnostic connector in the engine compartment, the use of the SIA reset tool is not possible. [. . . ] If "reset" is not shown, the minimum limit has not been reached and resetting is not possible. · Press and hold the reset button again until the word "RESET" begins to flash. · While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: "END SIA" The system can only be reset again after 10 liters (2. 5gal) of fuel have been consumed. 1 80 60 40 12 0 100 80 60 40 2 100 120 140 160 180 200 220 240 km/h 3 2 120 1/min x1000 4 5 6 1 140 11 UNLEADED GASOLINE ONLY 20 20 0 PRESS AND HOLD LEFT BUTTON 50 30 20 15 7 12 MPH Mmiles TURN KEY TO POSITION 1 (KL R) OILSERVICE ESET SIA 15000 Miles END SIA KEEP BUTTON PRESSED FOR 5 SECONDS AFTER KEY IS SWITCHED ON. TAP BUTTON TO RESET DISPLAY E46 service interval reset Reset procedure for clusters with SIA IV using the Reset Mode. (possible from 9/99 for E46, MY2001 E52) · · Ignition key must be "off" Press and hold the trip odometer button in the instrument cluster (left button), and turn the ignition key to the first position. Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: "OIL SERVICE, or "INSPECTION", with "rESET". [. . . ] After the display has shown the new interval, the following will appear: "END SIA" · · · The system can only be reset again after 10 liters (2. 5gal) of fuel have been consumed. [. . . ]