User manual BLACK & DECKER KP1200

[. . . ] A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. [. . . ] If the power cord is damaged, it must be replaced by the manufacturer, authorized Black & Decker Service Center or an equally qualified person in order to avoid damage or injury. If the power cord is replaced by an equally qualified person, but not authorized by Black & Decker, the warranty will not be valid. Labels on tool The label on your tool may include the following symbols: Hold power tool by insulated gripping surfaces, because the belt may contact its own cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Contact with or inhalation of dusts arising from polishing applications may endanger the health of the operator and possible bystanders. Wear a dust mask specifically designed for protection against dust and fumes and ensure that persons within or entering the work area are also protected. Take special care when sanding paint which is possibly lead based or when sanding some woods and metal which may produce toxic dust: - Do not let children or pregnant women enter the work area. This tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or damage to property. Make sure the bonnet is fitted securely and evenly around the underside of the pad. If necessary, remove road tar with a general cheaner before polishing. Using liquid wax & paste wax Black & Decker recommends the use of liquid wax with this polisher. For best results, use light pressure only, letting the polisher do the work. [. . . ] The use of any other accessory not recommended for use with this tool could be hazardous. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Separate collection of used products and packaging allows materials to be recycled and used again. [. . . ]