User manual BLACK & DECKER KA220E

[. . . ] Do not force small tools or attachments to do the job of a heavy duty tool. Do not use the tool for purposes not intended; for example, do not use a circular saw to cut tree limbs or logs. Do not wear loose clothing or jewellery as they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. [. . . ] • The cable wire colours, or a letter, will be marked at the connection point of most good quality plugs. Attach the wires to their respective points in the plug (see diagram). Brown is L (live) and blue is N (neutral). Fit a plug approved to BS1363A N E L Fit a 5 amp fuse Connect blue to N (neutral) Make sure that the outer sheath of the cable is held Connect brown to L (live) 230 volts AC only. Never use firmly by the clamp a light socket • Before replacing the top cover of the plug ensure that the cable restraint is holding the outer sheath of the cable firmly and that the two leads are correctly fixed at the terminal screws. For replacement or detachable fuse covers, contact a Black & Decker service agent. Never connect live or neutral wires to the earth pin marked E or . MAINS PLUG REPLACEMENT (AUSTRALIA AND NEW ZEALAND ONLY) Should the mains plug or cordset of the product be damaged, it must only be replaced by an authorised 5 ENGLISH Black & Decker service agent because special purpose tools are required. EXTENSION CABLES Up to 30m (100ft) of 3-core extension cable can be used without undue loss of power. Note: An extension cable should not be used unless absolutely necessary. Use of an improper extension cable could result in a risk of fire and electric shock. If an extension cable must be used, make sure it is properly wired, contains the correct rated fuse as recommended in its literature and is in good electrical condition. UNWANTED TOOLS AND THE ENVIRONMENT Should you find one day that the tool needs replacement or is of no further use, think of the protection of the environment. Black & Decker service agents will accept old tools and will dispose of them in an environmentally safe way. THE BLACK & DECKER GUARANTEE (UK, AUSTRALIA AND NEW ZEALAND ONLY) If the Black & Decker product becomes defective due to faulty materials and workmanship, within 24 months from the date of purchase, we guarantee to either replace all defective parts or at our discretion, replace the unit free of charge provided that: • The product is returned to us or our authorised repairers with evidence of date of purchase. • The product has not been used for trade, professional or hire purposes. • The product has not sustained any damage through foreign objects, substances or accidents. • Repairs have not been attempted by anyone other than our authorised repair agents. This guarantee is offered as an extra benefit and is additional to the customers statutory rights. AFTER SALES SERVICE FOR YOUR BLACK & DECKER PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY) Black & Decker offers a nationwide network of authorised service agents. The use of other than genuine Black & Decker accessories and parts may damage or reduce the performance of your Black & Decker product and may also endanger the user. OUR AFTER SALES SERVICE POLICY (UK, AUSTRALIA AND NEW ZEALAND ONLY) It is our aim that all Black & Decker customers should be totally satisfied with their Black & Decker product 6 and after sales service, but if help or advice is needed please contact your local Black & Decker authorised repair agent who will be happy to help. Full details of our after sales service and a list of these agents can be found on the Internet at www. 2helpU. com. Alternatively, call our Service and Information Centre whose number you will find towards the back of this manual. [. . . ] A special adaptor is available from Black & Decker as an accessory. Squeeze the sides of the dustbag together, adjacent to the finger grips and pull the bag gently. Empty the dustbag and replace on the sander. • Do not apply excessive pressure when you use your multi sander, especially in the random orbit mode. As a general rule, start with coarse grits and gradually change to the finer grits for the final finish. [. . . ]