User manual BLACK & DECKER KA165GT

[. . . ] Guard against electric shock Prevent body contact with earthed or grounded surfaces (e. g. Electric safety can be further improved by using a high-sensitivity (30 mA / 30 mS) residual current device (RCD). Connect dust extraction equipment If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used. 4 Remove adjusting keys and wrenches Always check that adjusting keys and wrenches are removed from the tool before operating the tool. Extension cables Before use, inspect the extension cable and replace if damaged. [. . . ] Maintain tools with care Keep cutting tools sharp and clean for better and safer performance. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. Additional safety instructions for sanders N Always wear a dust mask whenever sanding. N Before using the tool on wooden workpieces, make sure to fit dust extraction equipment. N Before using the tool on metal workpieces, make sure to remove the dust extraction equipment. N Hearing protection should be worn whenever the sound level seems uncomfortable. Sanding lead-based paint or MDF Sanding of lead-based paint is not recommended due to the difficulty of controlling the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. Any pre-1960 building may in the past have been painted with paint containing lead. Before starting work, it is important to determine whether the paint to be sanded contains lead. Personal protection N Do not let children or pregnant women enter the work area. N Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected. Environment N Remove the paint in such a way that the amount of dust is minimised. Cleaning N Thoroughly vacuum and clean all surfaces in the work area every day. N Thoroughly wash any foreign objects exposed to dust before using them again. Additional safety instructions for Australia and New Zealand N This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance. N If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Features This tool includes some or all of the following features. Sanding profiles (KA165GTK only) In addition, this tool is supplied with some or all of the following accessories: Accessory Recommended application and use - Coarse grit sandpaper Fast paint, varnish and rust removal - Medium grit sandpaper Paint, varnish and rust removal - Fine grit sandpaper Surface blending and finishing - Extra fine grit sandpaper Sanding between coats - Detail sanding tips Corners and hard to reach places - 1 OT polishing/stripping wool Polishing metals, stripping varnish and glass cleaning - Grey foam pad Applying and removing polish - Red non-woven pad Heavy scrubbing and rust removal - Grey abrasive paper Polishing plastics - Contour attachments Curves and profiles Assembly Warning!Before assembly, make sure that the tool is switched off and unplugged. A & B) N Detach the two diamond-shaped tips (11) from the sanding sheet (12). 5 Hold the tool with the sanding base facing upwards. Place the sanding sheet (12) onto the sanding base, making sure that the holes in the sheet line up with the holes in the base. [. . . ] Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool. Maintenance Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. & Ireland only) If a new mains plug needs to be fitted: N Safely dispose of the old plug. [. . . ]