User manual BLACK & DECKER KA161K

[. . . ] Electric safety can be further improved by using a highsensitivity (30 mA / 30 mS) residual current device (RCD). Connect dust extraction equipment If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used. Remove adjusting keys and wrenches Always check that adjusting keys and wrenches are removed from the tool before operating the tool. Extension cables Before use, inspect the extension cable and replace if damaged. When using the tool outdoors, only use extension cables intended for outdoor use. [. . . ] Additional safety instructions for sanders x Always wear a dust mask whenever sanding. x Before using the tool on wooden workpieces, make sure to fit dust extraction equipment. x Before using the tool on metal workpieces, make sure to remove the dust extraction equipment. x Hearing protection should be worn whenever the sound level seems uncomfortable. Sanding lead-based paint or MDF Sanding of lead-based paint is not recommended due to the difficulty of controlling the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. Any pre-1960 building may in the past have been painted with paint containing lead. Before starting work, it is important to determine whether the paint to be sanded contains lead. Personal protection x Do not let children or pregnant women enter the work area. x Wear a dust mask specifically designed for protection against lead paint dust and fumes and ensure that persons within or entering the work area are also protected. Environment x Remove the paint in such a way that the amount of dust is minimised. Cleaning x Thoroughly vacuum and clean all surfaces in the work area every day. x Thoroughly wash any foreign objects exposed to dust before using them again. Additional safety instructions for Australia and New Zealand x This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance. x If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Features This tool includes some or all of the following features. Sanding profiles In addition, this tool is supplied with some or all of the following accessories: Recommended application and use Coarse grit sandpaper Fast paint, varnish and rust removal Medium grit sandpaper Paint, varnish and rust removal Fine grit sandpaper Surface blending and finishing Extra fine grit sandpaper Sanding between coats Detail sanding tips Corners and hard to reach places 1 OT polishing/ Polishing metals, stripping stripping wool varnish and glass cleaning Grey foam pad Applying and removing polish Red non-woven pad Heavy scrubbing and rust removal Grey abrasive paper Polishing plastics Contour attachments Curves and profiles Accessory - Assembly Warning!A & B) x Detach the two diamond-shaped tips (10) from the sanding sheet (11). x Place the sanding sheet (11) onto the sanding base, making sure that the holes in the sheet line up with the holes in the base. The diamond-shaped tip (10) can be reversed and replaced when worn. 5 x x x When the front part of the tip is worn, detach it from the sheet, reverse it and press it onto the sanding base again. When the whole tip is worn, remove it from the sanding base and fit a new tip. The polishing foam and pads (14) can be fitted the same way as the sanding sheets. Tip of the sanding base (fig. C) When the sanding base tip (5) or tip holder (4) is worn, it can be reversed or replaced. [. . . ] To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. Use Warning!Make sure that the sanding base is flat on the workpiece. 6 You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www. 2helpU. com. 01753 511234 Fax 01753 551155 Helpline 01753 574277 7 KA161 - KA161K TYP 1 101 105 104 106 103 102 KA161K E13387 / 582158-00 8 WWW. 2helpU. com 27 - 06 - 02 9 10 Dealer address Date of purchase Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]