User manual BLACK & DECKER KA 280 K

[. . . ] Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) protected supply. Failure to follow all instructions may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. [. . . ] D & E) For detail sanding, the pointed end should face forward (fig. For sanding large areas, the pointed end should face to the rear (fig. ρ Attach the sanding base as described above under "Attaching the random orbit sanding base". ρ Press in on the sanding base until you hear it click into place. F)  Detach the two diamond-shaped tips (13) from the sanding sheet (14). ρ Place the sanding sheet (14) onto the sanding base, making sure that the holes in the sheet line up with the holes in the base. ρ Remove the diamond-shaped tip holder (16) from the sanding base. J & K) Choose the sanding profile most suitable for your application. ρ Place one end of the sanding profile (20) into the recess at the front end of the profile attachment (19). ρ Push the other end of the sanding profile until it clicks into place. ρ To remove the sanding profile (20), push it forward and pull the rear end out of the profile attachment (19). ρ Press the sanding sheet onto the sanding profile, making sure that the sanding sheet follows the shape of the profile. ρ Remove the diamond-shaped tip holder (16) from the sanding base. The additional piece of hook and loop fastener (23) can be attached to the top surface of the louvre attachment to allow for sanding using both sides. ρ Stick the hook and loop fastener to the top surface of the louvre attachment (22). Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include:  Injuries caused by touching any rotating/moving parts. When using any tool for prolonged periods make sure you take regular breaks. ρ Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF). O) This sander is fitted with an Autoselect® dial (2) which shows various sanding applications. They are used to select the correct operating mode for your particular sanding operation. [. . . ] The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:  The product has been used for trade, professional or hire purposes. 13 ENGLISH  Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. [. . . ]