User manual BLACK & DECKER GPC1820L

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BLACK & DECKER GPC1820L. We hope that this BLACK & DECKER GPC1820L user guide will be useful to you.


BLACK & DECKER GPC1820L : Download the complete user guide (2914 Ko)

Manual abstract: user guide BLACK & DECKER GPC1820L

Detailed instructions for use are in the User's Guide.

[. . . ] Australia GPC1820L-XE New Zealand www. blackanddecker. com. au 24 12 2 3 ENGLISH (Original instructions) 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] The declared vibration emission value may also be used in a preliminary assessment of exposure. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Pruning Before attempting to prune a tree, ensure there are not bylaws or regulations that would prohibit or control the felling of the tree. Consider all conditions that may affect the direction of fall, including: - the length and weight of the branch to be cut - the intended direction of fall - any unusual heavy limb structure or decay - the presence of surrounding trees and obstacles, - including overhead lines - the intertwinement with other branches - the speed and direction of the wind. 6 Beware of falling objects. To ensure continued safe operation, check the chain tension as described in this manual after every 10 minutes of use, and adjust back to a clearance of 3 mm as required. Oil the chain after every 10 minutes of use Direction of rotation of the chain. Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include:  Injuries caused by touching any rotating/moving parts. When using any tool for prolonged periods make sure you take regular breaks.  Impairment of hearing. (Original instructions)  ENGLISH Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF). Symbols on the charger The following symbols are found on your charger: Your charger is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate.  If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.  The charger must be placed in a well ventilated area when charging. Fig. Slide the battery into the receptacle and push until the battery snaps into place.  To remove the battery, push the release button (13) while at the same time pulling the battery out of the receptacle. To prevent accidental operation, ensure that the battery is removed and that the chain sheath is in placed on the saw chain before performing the following operations. Failure to do this could result in serious personal injury. achieve standard reach. 7 ENGLISH  (Original instructions)  Align the groove on the outside of the coupling end of the handle (3) with the tongue on the inside of the coupling end of the saw head (4).  Slide the collar (14) down and rotate it clockwise until it is fully tightened. Periodically check the connections to ensure that they are tightened securely. To charge the battery (11), remove it from the tool and the charger in one way. The charge is complete when the charging indicator (24) lights green continuously. [. . . ] Regularly open the chuck and tap it to remove any dust from After use and before storage  Regularly clean the ventilation slots with a clean, dry paint brush. Never let any liquid get inside the tool and never immerse any part of the tool into liquid. Always wear protective gloves when installing or removing the saw chain. The saw chain is sharp and can cut you when it is not running.   the screws (16). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLACK & DECKER GPC1820L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLACK & DECKER GPC1820L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.