User manual BLACK & DECKER GL9035

[. . . ] U Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. U To reduce the risk of damage to plugs or cords, never pull the cable to remove the plug from a socket. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. [. . . ] U Slide the secondary handle (5) in place over the adjustment button (6). Ensure that the teeth on the button are correctly aligned in slots in the handle and that the handle is secure. u HDL: Heavy Duty Dual Line cutting system for more overgrown areas. The cutting system not in use can be stored in the spare spool storage (GL8033 & GL9035 Only). U Align the tabs (17) on the spool cover with the cut outs (18) in the spare spool storage (8). U Push the cover onto the spare spool storage until it snaps securely into place. C) Connect the female plug of a suitable extension cable to the power inlet (4). For wired in cable units: Make sure the cable is looped through the cable restraint prior to connecting the plug to the mains outlet. d) Use The secondary handle (5) can be adjusted to provide optimum balance and comfort. Ensure that the teeth on the button are correctly aligned in slots in the handle and that the handle is secure. I) For trimming, the trimmer head should be in the position shown in fig. 7 ENGLISH u (Original instructions) Remove the empty spool (22) from the spool cover. U Unclip the end of of the cutting line and guide the line into the eyelet (23) (fig. U Align the tabs (17) on the spool cover with the cut outs (24) in the housing (12). U Push the cover onto the housing until it snaps securely into place. If the cutting lines protrude beyond the trimming blade (11), cut it off so that it just reaches the blade. U u When the head is in position, close the height adjust locking clamp (16). J) For edging, the trimmer head should be in the position shown in fig. U When the head is in position, close the height adjust locking clamp (16). Switching on and off u u To switch the tool on, squeeze the on/off switch (1). O & P) Hints for optimum use General u In order to achieve optimum cutting results, only cut dry grass. U Cutting line will wear faster and require more feeding if the cutting is done along pavements or other abrasive surfaces or heavier weeds are being cut. [. . . ] No for å registrere ditt nye Black & Decker-produkt og for å holde deg oppdatert om nye produkter og spesialtilbud. Nedenstående, altid følges for at mindske risikoen for brand, elektrisk stød, personskade og materiel skade. Dette apparat må ikke bruges af personer (herunder børn) med nedsatte fysiske, sensoriske eller mentale evner eller manglende erfaring og viden, med mindre det sker under overvågning, eller der gives instruktion i brugen af apparatet af en person, der er ansvarlig for deres sikkerhed. U For at reducere risikoen for beskadigelse af stik eller ledninger må du aldrig trække i ledningen for at tage stikket ud af en stikkontakt. [. . . ]