User manual BLACK & DECKER GK1635

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BLACK & DECKER GK1635. We hope that this BLACK & DECKER GK1635 user guide will be useful to you.


BLACK & DECKER GK1635 : Download the complete user guide (1905 Ko)

Manual abstract: user guide BLACK & DECKER GK1635

Detailed instructions for use are in the User's Guide.

[. . . ] GK1630T GK1635T GK1640T English (Original instructions) 6 2 3 4 5 Intended use Your Black & Decker chainsaw has been designed for pruning and felling trees and cutting logs. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning!Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. [. . . ] Up to 30 m of HO7RN-F 2 X 1. 5 mm² extension cable can be used without loss of product performance. Before use, inspect the extension cable for signs of damage, wear and ageing. Electric safety can be further improved by using a high-sensitivity (30 mA/ 30mS) Residual Current Device (RCD). When using any tool for prolonged periods ensure you take regular breaks. u Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF. ) 1. On/off switch 2. Lock-off button 3. Oil cap 4. Front guard/chain brake 5. Oil level indicator 6. Chain 7. Guide bar 8. Chain sheath 9. Control knob 10. Chain cover assembly Assembly @ @ Warning!Before performing any maintenance on power tools, switch off and unplug the appliance. Oiling the chain Labels on tool i; The following pictograms are shown on the tool: Warning!To reduce the risk of injury, the user must read the instruction manual. : R C Always wear ear and eye protection Do not expose the tool to rain or high humidity. Always remove the plug from the socket before inspecting a damaged cable. Be careful not to use your chainsaw if the cable is damaged. You must do this whenever you use a new chain (6) for the first time. Take the new chain (6) and soak it in chain oil for at least an hour before using it. We recommend that you use only Black & Decker oil during the lifetime of your chainsaw because mixtures of different oils could lead to the oil becoming degraded, which can drastically shorten the lifetime of the saw chain and create additional risks. Set the front guard/chain brake assembly to the forward position (fig. u Remove the chain cover assembly (10). 9 Place the chain (6) over the guide bar (7) making sure that the saw chain cutters on the upper part of the guide bar (7) face towards the front (fig. u Guide the chain (6) around the guide bar (7) and pull it to create a loop to one side at the rear end of the guide bar (7). E). u u Allow the control knob to spring back to the „out“ position and rotate further clockwise to tighten the guide bar. Make sure that the front guard/chain brake assembly (4) is in the set (forward) position before refitting (fig. Before fitting the chain cover assembley check that the cam (11) (fig. If necessary, press in and turn the control knob (9) clockwise to rotate the cam into the correct position. u Fit the chain cover by locating the bolt and using the control knob (9) to tighten the chain cover finger tight. u To tension the chain, loosen the control knob one full turn, press in firmly and rotate clockwise. As the bar moves forward make sure that the chain links feed into the guide bar. u Allow the control knob to spring back to the „out“ position and rotate further clockwise to tighten the guide bar. [. . . ] & Ireland only) If a new mains plug needs to be fitted: u Safely dispose of the old plug. Recommended fuse: 10 A. Protecting the environment Separate collection. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Technical data Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class GK1630T Typ. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLACK & DECKER GK1635




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLACK & DECKER GK1635 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.