User manual BLACK & DECKER DV1205EN

[. . . ] Never attempt to remove or replace any parts other than those specified in this manual. Additional safety instructions batteries and chargers Batteries Never attempt to open for any reason. Using the wrong charger could result in an electric shock or overheating of the battery. When disposing of batteries, follow the instructions given in the section "Protecting the environment". [. . . ] Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include: Injuries caused by touching any rotating/moving parts. When using any tool for prolonged periods make sure you take regular breaks. Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF). Make sure that the dust collector extension (1) is pushed back into the dust collector (2). The battery will not be charged with the on/off switch (4) in the on position. The charger on this unit has been designed to save energy but also give faster charging. When the unit is in the fast charge mode the charge indicator (5) will be illuminated most of the time with short off periods. When the charger detects that full charge has been reached the charger will change modes and the indicator will be off most of the time with short pulses on showing that the charger is maintaining the battery charge and keeping the product ready for use. D) Extend the dust collector (2) by pulling the dust collector extension (1) until it locks into position. Retract the dust collector extension (1) by pressing the area (12) marked with an arrow and pushing the dust collector extension (1) back into the dust collector (2). F) In order to keep the suction force optimised, the filters must be cleared regularly during use. Slide the filter cleaning button (6) up and down a few times to shake out dust clogging the filters (10 & 11). Separate the filters (10 & 11) Brush any loose dust from the filters (10 & 11). Make sure that the dust collector (2) and the filters (10 & 11) are dry. Refit the filters (10 & 11) on to the appliance, twisting them counterclockwise until they lock into place. Replacing the filters The filters should be replaced every 6 to 9 months and whenever worn or damaged. K & L) Press the accessories into the corresponding holders until they click into place. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Separate collection of used products and packaging allows materials to be recycled and used again. re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. [. . . ] To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www. Uk to register your new Black & Decker product and to be kept up to date on new products and special offers. [. . . ]