User manual BLACK & DECKER DN 85

[. . . ] Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. [. . . ] X Take special care when sanding paint which is possibly lead based or when sanding some woods and metal which may produce toxic dust: - Do not let children or pregnant women enter the work area. C) The variable speed control allows you to adapt the speed of the tool to the workpiece material. use a high Speed for wood, medium speed for veneer and synthetics and low speed for acrylic glass, non-ferrous metals and for removing paints. Switching on and off x To switch the tool on, press the on/off switch (1). To switch the tool off when in continuous operation, press the on/off switch once more and release it. Always check that the power supply corresponds to the voltage on the rating plate. Emptying the dustbag The dustbag should be emptied every 10 minutes. Before assembly, make sure that the tool is switched off and unplugged. X Pull the tension lever (4) outward to release the tension on the sanding belt (6). X When sanding new layers of paint before applying Another layer, use extra fine grit. X On very uneven surfaces, or when removing layers of Paint, start with a coarse grit. X Consult your retailer for more information on available accessories. Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. X Regularly clean the ventilation slots in your tool using a Soft brush or dry cloth. & Ireland only) If a new mains plug needs to be fitted: x Safely dispose of the old plug. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. KpA (sound pressure uncertainty) 3 dB(A), KWA (acoustic power uncertainty) 3 dB(A) Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. [. . . ] Hastighet til tre, middels hastighet til finér og syntetisk materiale, og lav hastighet for ikke-jern-metall og for fjerning av maling. Sørg for at dette produktet gjøres tilgjengelig for kildesortering. No for å registrere ditt nye Black & Decker-produkt og for å holde deg oppdatert om nye produkter og spesialtilbud. Sørg for, at el-værktøjets afbryder er på off, før det sluttes til strømmen. [. . . ]