User manual BLACK & DECKER CD105

[. . . ] Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Your Black & Decker polisher has been designed for sanding and polishing wood, metal, plastics and painted surfaces. [. . . ] The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Too much wax may have been applied if: - towel applicator bonnet (5) continually comes off pad; - buffing seems difficult. For the second and third applications of wax, use half the quantity stated above. Spread about a heaping teaspoonful of wax evenly over the entire surface of the towel applicator bonnet (5). Make sure the polisher is in the off ("0") position before plugging the polisher into an appropriate power outlet. place the cord over your shoulder and do flat surfaces first-hood , trunk and roof. Cover areas quickly with broad, sweeping strokes in a criss-cross pattern (Fig. Take off the towel applicator bonnet (5) and put a clean polishing bonnet (6) on the polisher as described in the section "Fitting the towel applicator or polishing bonnet (Fig. Your Black & Decker power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Regularly clean the ventilation slots in your tool using a soft brush or dry cloth. Regularly open the chuck and tap it to remove any dust from the interior. [. . . ] Regularly open the chuck and tap it to remove any dust from the interior. take it to an authorized Black & Decker repair agent for service. Your charger does not require any maintenance apart from regular cleaning. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. [. . . ]