User manual BEKO WMD 76106

[. . . ] You should use detergent specially designed for automatic washing machines. auxiliary Functions Express: Shortens washing time for lightly soiled fabrics. This function can be used for cotton and synthetic programs for temperatures below 60°C. Rinse plus: By using this function your machine will add another rinse process to the three rinse processes that it has already done. [. . . ] If the problem persists unplug your machine, turn off tap water and call authorized service. If program is started and program selection can not be performed your machine might be in protection mode due to infrastructure problem (voltage, water pressure, etc. ) Press and hold the > Start/Pause/Cancel < button for 3 seconds in order to switch machine to factory settings. Before starting your machine please beware of below mentioned points: Did you plug the cable?Sorting the Laundry Sort laundry according to type of fabric, color, level of dirtiness and allowed washing temperature. Very tiny laundry like baby clothes may get into inside of drum, midst of bellow, pump filter, hose, etc. In order to prevent this it is advised to place Your machine will spin not more than 800 cycle / min. In addition if you do not want to spin your laundry you may choose "No Spin" position. Pressing "On/Off" By pressing "On/Off" button you can make your machine ready for selecting program. When "On/Off" key is pressed "door" led will light on meaning "door can open". You must press "Start/Pause/Cancel" for starting the program. After the selection of time delay when "Start/Pause/Cancel" is pressed program can be started with delay. During delay period door can be opened or laundry can be added After time delay is initiated by pressing "Start/Pause/Cancel" you can switch machine to "Pause" mode and change delay time. For canceling a program "Start/Pause/ Cancel" key is pressed for three seconds. After this period "Start/Pause/ Cancel" and all other leds will be off . If cancel task is performed during washing "Spin" led on display will light on, machine will pump and when "Spin" led is off "door" led will be on, door can be opened and new program can be selected. After machine starts operation even if spin speed or washing temperature is changed, initial speed and temperature is valid. In order to change spin speed or temperature after pressing "Start/Pause/Cancel" new cycle or temperature can be selected. End of Program When program ends " door" led will light on and door can be opened and machine is ready for next washing. After taking laundry out keep the loading door open and let the drum ventilate. After cleaning place suction cup to its place and make sure it is placed properly. Detergent Dispenser Powder detergent residue may accumulate in drawer after a while. [. . . ] Your machine will operate efficiently if the water from tap is minimum 1 and maximum 10 bars. Practically 1 bar means 8 liters of water in one minute when tap is fully on. If machine is connected with Y part to a double inlet and over 40°C for single inlet machines, machine may switch to protection mode. B) Water drain hose: Water drain hose could be placed either at the side of the bath tub, or directly to the drain. [. . . ]